[ 0.000000] Linux version 5.17.5-76051705-generic (XXX@XXX) (gcc (Ubuntu 11.2.0-7ubuntu2) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.37) #202204271406~1651504840~21.10~63e51bd SMP PREEMPT Mon May 2 15: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.17.5-76051705-generic root=UUID=HASH_42C-89EC-36D8-A606-6FB9ED7ADD62 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x219/0x230 with crng_init=0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be10dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000be10e000-0x00000000be4ddfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4de000-0x00000000be8c8fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8c9000-0x00000000bee5efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee5f000-0x00000000bee5ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee60000-0x00000000bf065fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf066000-0x00000000bf462fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf463000-0x00000000bf7f2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f3000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000033effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./970 Extreme3 R2.0, BIOS P2.60 05/31/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] last_pfn = 0x33f000 max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 3064M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fc4a0-0x000fc4af] [ 0.000000] Using GB pages for direct mapping [ 0.000000] RAMDISK: [mem 0x2ef5d000-0x337a5fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BE8B9078 00006C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BE8BF2A0 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20211217/tbfadt-615) [ 0.000000] ACPI: DSDT 0x00000000BE8B9178 006123 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000BE8C2080 000040 [ 0.000000] ACPI: APIC 0x00000000BE8BF3B0 00008E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BE8BF440 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000BE8BF488 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: AAFT 0x00000000BE8BF4C8 000062 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BE8BF530 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: UEFI 0x00000000BE8BF568 000042 (v01 ALASKA A M I 01072009 00000000) [ 0.000000] ACPI: SSDT 0x00000000BE8BF5B0 001158 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: BGRT 0x00000000BE8C0708 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Reserving FACP table memory at [mem 0xbe8bf2a0-0xbe8bf3ab] [ 0.000000] ACPI: Reserving DSDT table memory at [mem 0xbe8b9178-0xbe8bf29a] [ 0.000000] ACPI: Reserving FACS table memory at [mem 0xbe8c2080-0xbe8c20bf] [ 0.000000] ACPI: Reserving APIC table memory at [mem 0xbe8bf3b0-0xbe8bf43d] [ 0.000000] ACPI: Reserving FPDT table memory at [mem 0xbe8bf440-0xbe8bf483] [ 0.000000] ACPI: Reserving MCFG table memory at [mem 0xbe8bf488-0xbe8bf4c3] [ 0.000000] ACPI: Reserving AAFT table memory at [mem 0xbe8bf4c8-0xbe8bf529] [ 0.000000] ACPI: Reserving HPET table memory at [mem 0xbe8bf530-0xbe8bf567] [ 0.000000] ACPI: Reserving UEFI table memory at [mem 0xbe8bf568-0xbe8bf5a9] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xbe8bf5b0-0xbe8c0707] [ 0.000000] ACPI: Reserving BGRT table memory at [mem 0xbe8c0708-0xbe8c073f] [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000033effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x33efd5000-0x33effffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000033effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000be10dfff] [ 0.000000] node 0: [mem 0x00000000bee5f000-0x00000000bee5ffff] [ 0.000000] node 0: [mem 0x00000000bf066000-0x00000000bf462fff] [ 0.000000] node 0: [mem 0x00000000bf7f3000-0x00000000bf7fffff] [ 0.000000] node 0: [mem 0x0000000100001000-0x000000033effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000033effffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 3409 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 912 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009ffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xbe10e000-0xbe4ddfff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xbe4de000-0xbe8c8fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xbe8c9000-0xbee5efff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xbee60000-0xbf065fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xbf463000-0xbf7f2fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.000000] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3085507 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.17.5-76051705-generic root=UUID=HASH_42C-89EC-36D8-A606-6FB9ED7ADD62 ro quiet splash vt.handoff=7 [ 0.000000] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.17.5-76051705-generic", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xf444000000-0xf445ffffff] (32MB) [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 12065876K/12538568K available (16392K kernel code, 4472K rwdata, 10912K rodata, 2768K init, 4888K bss, 472432K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] ftrace: allocating 51208 entries in 201 pages [ 0.000000] ftrace: allocated 201 pages with 4 groups [ 0.000000] Dynamic Preempt: voluntary [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1016, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] printk: console [tty0] enabled [ 0.000000] ACPI: Core revision 20211217 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.032000] tsc: Unable to calibrate against PIT [ 0.032000] tsc: using HPET reference calibration [ 0.032000] tsc: Detected 3400.473 MHz processor [ 0.000004] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x31040da63eb, max_idle_ns: 440795345015 ns [ 0.000009] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.94 BogoMIPS (lpj=13601892) [ 0.000012] pid_max: default: 32768 minimum: 301 [ 0.000043] LSM: Security Framework initializing [ 0.000056] landlock: Up and running. [ 0.000057] Yama: becoming mindful. [ 0.000083] AppArmor: AppArmor initialized [ 0.000164] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000213] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000480] LVT offset 1 assigned for vector 0xf9 [ 0.000485] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.000487] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.000491] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.000494] Spectre V2 : Mitigation: Retpolines [ 0.000495] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.000497] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.000498] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.005521] Freeing SMP alternatives memory: 40K [ 0.117692] smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (family: 0x15, model: 0x2, stepping: 0x0) [ 0.117848] cblist_init_generic: Setting adjustable number of callback queues. [ 0.117851] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.117871] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.117897] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.117915] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.117920] ... version: 0 [ 0.117921] ... bit width: 48 [ 0.117922] ... generic registers: 6 [ 0.117923] ... value mask: 0000ffffffffffff [ 0.117925] ... max period: 00007fffffffffff [ 0.117926] ... fixed-purpose events: 0 [ 0.117927] ... event mask: 000000000000003f [ 0.118005] rcu: Hierarchical SRCU implementation. [ 0.118520] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.118618] smp: Bringing up secondary CPUs ... [ 0.118763] x86: Booting SMP configuration: [ 0.118764] .... node #0, CPUs: #1 #2 #3 #4 #5 [ 0.144069] smp: Brought up 1 node, 6 CPUs [ 0.144069] smpboot: Max logical packages: 1 [ 0.144069] smpboot: Total of 6 processors activated (40805.67 BogoMIPS) [ 0.148734] devtmpfs: initialized [ 0.148734] x86/mm: Memory block size: 128MB [ 0.149348] ACPI: PM: Registering ACPI NVS region [mem 0xbe4de000-0xbe8c8fff] (4108288 bytes) [ 0.149348] ACPI: PM: Registering ACPI NVS region [mem 0xbee60000-0xbf065fff] (2121728 bytes) [ 0.149348] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.149348] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.149348] pinctrl core: initialized pinctrl subsystem [ 0.149348] PM: RTC time: 10:13:24, date: 2022-05-07 [ 0.149348] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.152321] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.152606] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.152879] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.152904] thermal_sys: Registered thermal governor 'fair_share' [ 0.152904] thermal_sys: Registered thermal governor 'bang_bang' [ 0.152904] thermal_sys: Registered thermal governor 'step_wise' [ 0.152904] thermal_sys: Registered thermal governor 'user_space' [ 0.152904] thermal_sys: Registered thermal governor 'power_allocator' [ 0.152904] EISA bus registered [ 0.152904] cpuidle: using governor ladder [ 0.152904] cpuidle: using governor menu [ 0.152904] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.152904] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.152904] PCI: not using MMCONFIG [ 0.152904] PCI: Using configuration type 1 for base access [ 0.152904] PCI: Using configuration type 1 for extended access [ 0.154550] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.154560] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.154560] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.156111] ACPI: Added _OSI(Module Device) [ 0.156113] ACPI: Added _OSI(Processor Device) [ 0.156114] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.156115] ACPI: Added _OSI(Processor Aggregator Device) [ 0.156117] ACPI: Added _OSI(Linux-Dell-Video) [ 0.156118] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.156120] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.162388] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.163891] ACPI: Interpreter enabled [ 0.163913] ACPI: PM: (supports S0 S3 S4 S5) [ 0.163914] ACPI: Using IOAPIC for interrupt routing [ 0.164144] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.164205] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.164220] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.164485] ACPI: Enabled 11 GPEs in block 00 to 1F [ 0.172907] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.172914] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.173377] PCI host bridge to bus 0000:00 [ 0.173380] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.173382] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.173384] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.173386] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.173388] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.173390] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.173392] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.173408] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.173527] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.173548] pci 0000:00:02.0: enabling Extended Tags [ 0.173574] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.173671] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.173690] pci 0000:00:09.0: enabling Extended Tags [ 0.173742] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.173841] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.173855] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097] [ 0.173863] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083] [ 0.173871] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077] [ 0.173879] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063] [ 0.173887] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f] [ 0.173894] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] [ 0.173994] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.174008] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] [ 0.174131] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.174145] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] [ 0.174209] pci 0000:00:12.2: supports D1 D2 [ 0.174211] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.174286] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.174300] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] [ 0.174418] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.174431] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] [ 0.174496] pci 0000:00:13.2: supports D1 D2 [ 0.174497] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.174574] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.174689] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.174703] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047] [ 0.174711] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033] [ 0.174719] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027] [ 0.174726] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013] [ 0.174734] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f] [ 0.174750] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.174752] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.174754] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.174755] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.174827] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.174844] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.174898] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.174996] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.175116] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.175225] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.175238] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] [ 0.175354] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.175387] pci 0000:00:15.0: enabling Extended Tags [ 0.175425] pci 0000:00:15.0: supports D1 D2 [ 0.175523] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400 [ 0.175556] pci 0000:00:15.3: enabling Extended Tags [ 0.175594] pci 0000:00:15.3: supports D1 D2 [ 0.175691] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.175705] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] [ 0.175819] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.175833] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] [ 0.175897] pci 0000:00:16.2: supports D1 D2 [ 0.175899] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.175973] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.176026] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.176071] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.176124] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.176172] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.176215] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.176303] pci 0000:01:00.0: [1002:68b8] type 00 class 0x030000 [ 0.176319] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.176330] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit] [ 0.176338] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.176351] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref] [ 0.176358] pci 0000:01:00.0: enabling Extended Tags [ 0.176375] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.176407] pci 0000:01:00.0: supports D1 D2 [ 0.176434] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x2 link at 0000:00:02.0 (capable of 32.000 Gb/s with 2.5 GT/s PCIe x16 link) [ 0.176481] pci 0000:01:00.1: [1002:aa58] type 00 class 0x040300 [ 0.176497] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit] [ 0.176532] pci 0000:01:00.1: enabling Extended Tags [ 0.176575] pci 0000:01:00.1: supports D1 D2 [ 0.176650] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.176654] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.176657] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.176660] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.176705] pci 0000:02:00.0: [1b6f:7052] type 00 class 0x0c0330 [ 0.176726] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit] [ 0.176772] pci 0000:02:00.0: enabling Extended Tags [ 0.176826] pci 0000:02:00.0: supports D1 D2 [ 0.176827] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.176912] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.176916] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.176928] pci_bus 0000:03: extended config space not accessible [ 0.176959] pci 0000:03:05.0: [104c:8024] type 00 class 0x0c0010 [ 0.176979] pci 0000:03:05.0: reg 0x10: [mem 0xfe804000-0xfe8047ff] [ 0.176990] pci 0000:03:05.0: reg 0x14: [mem 0xfe800000-0xfe803fff] [ 0.177071] pci 0000:03:05.0: supports D1 D2 [ 0.177073] pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot [ 0.177149] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.177154] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.177158] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.177160] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.177162] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.177164] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.177165] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.177167] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.177223] pci 0000:04:00.0: [168c:0030] type 00 class 0x028000 [ 0.177248] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe71ffff 64bit] [ 0.177298] pci 0000:04:00.0: reg 0x30: [mem 0xfe720000-0xfe72ffff pref] [ 0.177377] pci 0000:04:00.0: supports D1 [ 0.177378] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.177488] pci 0000:00:15.0: PCI bridge to [bus 04] [ 0.177520] pci 0000:00:15.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.177580] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.177601] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.177627] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref] [ 0.177644] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref] [ 0.177741] pci 0000:05:00.0: supports D1 D2 [ 0.177742] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.177853] pci 0000:00:15.3: PCI bridge to [bus 05] [ 0.177858] pci 0000:00:15.3: bridge window [io 0xd000-0xdfff] [ 0.177864] pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.178513] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.178615] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.178720] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.178850] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.178936] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.179004] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.179071] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.179137] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.179322] iommu: Default domain type: Translated [ 0.179322] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.179322] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.179322] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.179322] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.179322] vgaarb: loaded [ 0.179322] SCSI subsystem initialized [ 0.179322] libata version 3.00 loaded. [ 0.179322] ACPI: bus type USB registered [ 0.179322] usbcore: registered new interface driver usbfs [ 0.179322] usbcore: registered new interface driver hub [ 0.179322] usbcore: registered new device driver usb [ 0.179322] pps_core: LinuxPPS API ver. 1 registered [ 0.179322] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.179322] PTP clock support registered [ 0.179322] EDAC MC: Ver: 3.0.0 [ 0.180162] NetLabel: Initializing [ 0.180163] NetLabel: domain hash size = 128 [ 0.180165] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.180180] NetLabel: unlabeled traffic allowed by default [ 0.180199] mctp: management component transport protocol core [ 0.180199] NET: Registered PF_MCTP protocol family [ 0.180199] PCI: Using ACPI for IRQ routing [ 0.187010] PCI: pci_cache_line_size set to 64 bytes [ 0.187068] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff] [ 0.187070] e820: reserve RAM buffer [mem 0xbe10e000-0xbfffffff] [ 0.187072] e820: reserve RAM buffer [mem 0xbee60000-0xbfffffff] [ 0.187073] e820: reserve RAM buffer [mem 0xbf463000-0xbfffffff] [ 0.187075] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.187076] e820: reserve RAM buffer [mem 0x33f000000-0x33fffffff] [ 0.187083] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.187083] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.189071] clocksource: Switched to clocksource tsc-early [ 0.203515] VFS: Disk quotas dquot_6.6.0 [ 0.203531] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.203674] AppArmor: AppArmor Filesystem Enabled [ 0.203715] pnp: PnP ACPI init [ 0.203885] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.204043] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.204528] system 00:03: [io 0x040b] has been reserved [ 0.204531] system 00:03: [io 0x04d6] has been reserved [ 0.204533] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.204535] system 00:03: [io 0x0c14] has been reserved [ 0.204537] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.204539] system 00:03: [io 0x0c52] has been reserved [ 0.204541] system 00:03: [io 0x0c6c] has been reserved [ 0.204543] system 00:03: [io 0x0c6f] has been reserved [ 0.204544] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.204546] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.204548] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.204550] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.204551] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.204553] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.204555] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.204557] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.204559] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.204561] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.204563] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.204566] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.204568] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.204570] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.204572] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.204575] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.204577] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.204705] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.205075] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.205393] pnp 00:08: [dma 0 disabled] [ 0.205611] pnp: PnP ACPI: found 9 devices [ 0.212211] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.212275] NET: Registered PF_INET protocol family [ 0.212717] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.215859] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.216083] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.216410] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.216509] TCP: Hash tables configured (established 131072 bind 65536) [ 0.216685] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.216778] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.216854] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.216926] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.216933] NET: Registered PF_XDP protocol family [ 0.216950] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.216954] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.216958] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.216961] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.216965] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.216967] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.216972] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.216976] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.216983] pci 0000:00:15.0: PCI bridge to [bus 04] [ 0.216987] pci 0000:00:15.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.216993] pci 0000:00:15.3: PCI bridge to [bus 05] [ 0.216995] pci 0000:00:15.3: bridge window [io 0xd000-0xdfff] [ 0.217000] pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.217006] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.217008] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.217010] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.217012] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.217014] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.217016] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] [ 0.217018] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.217019] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.217021] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.217023] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.217025] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.217027] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.217029] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.217030] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.217032] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff window] [ 0.217034] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.217035] pci_bus 0000:03: resource 9 [mem 0xc0000000-0xffffffff window] [ 0.217037] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.217039] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.217041] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.242946] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x160 took 25233 usecs [ 0.262938] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x160 took 19295 usecs [ 0.282938] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x160 took 19297 usecs [ 0.302941] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x160 took 19519 usecs [ 0.303219] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.303451] PCI: CLS 64 bytes, default 64 [ 0.303543] Trying to unpack rootfs image as initramfs... [ 0.303918] PCI-DMA: Disabling AGP. [ 0.303974] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 0.303976] PCI-DMA: using GART IOMMU. [ 0.303977] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.304835] software IO TLB: tearing down default memory pool [ 0.306764] LVT offset 0 assigned for vector 0x400 [ 0.306986] perf: AMD IBS detected (0x000000ff) [ 0.307701] Initialise system trusted keyrings [ 0.307714] Key type blacklist registered [ 0.307798] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.309572] zbud: loaded [ 0.309989] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.310183] fuse: init (API version 7.36) [ 0.310370] integrity: Platform Keyring initialized [ 0.320960] Key type asymmetric registered [ 0.320962] Asymmetric key parser 'x509' registered [ 1.282691] Freeing initrd memory: 74020K [ 1.286438] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.286465] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.286510] io scheduler mq-deadline registered [ 1.287553] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.287699] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.287727] ACPI: button: Power Button [PWRB] [ 1.287763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.287799] ACPI: button: Power Button [PWRF] [ 1.287836] ACPI: \_PR_.P001: Found 2 idle states [ 1.287928] ACPI: \_PR_.P002: Found 2 idle states [ 1.288069] ACPI: \_PR_.P003: Found 2 idle states [ 1.288155] ACPI: \_PR_.P004: Found 2 idle states [ 1.288272] ACPI: \_PR_.P005: Found 2 idle states [ 1.288363] ACPI: \_PR_.P006: Found 2 idle states [ 1.288662] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.309092] tsc: Refined TSC clocksource calibration: 3400.549 MHz [ 1.309103] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x310455361c8, max_idle_ns: 440795326931 ns [ 1.309146] clocksource: Switched to clocksource tsc [ 1.309217] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.311797] Linux agpgart interface v0.103 [ 1.314005] loop: module loaded [ 1.314334] tun: Universal TUN/TAP device driver, 1.6 [ 1.314367] PPP generic driver version 2.4.2 [ 1.314438] VFIO - User Level meta-driver version: 0.3 [ 1.314589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.314592] ehci-pci: EHCI PCI platform driver [ 1.314737] QUIRK: Enable AMD PLL fix [ 1.314756] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.314762] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.314773] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.314781] ehci-pci 0000:00:12.2: debug port 1 [ 1.314822] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 1.328115] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.328256] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 1.328259] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.328261] usb usb1: Product: EHCI Host Controller [ 1.328263] usb usb1: Manufacturer: Linux 5.17.5-76051705-generic ehci_hcd [ 1.328265] usb usb1: SerialNumber: ... [ 1.328375] hub 1-0:1.0: USB hub found [ 1.328383] hub 1-0:1.0: 5 ports detected [ 1.328691] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.328696] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.328700] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.328708] ehci-pci 0000:00:13.2: debug port 1 [ 1.328734] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 1.344113] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.344237] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 1.344240] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.344243] usb usb2: Product: EHCI Host Controller [ 1.344244] usb usb2: Manufacturer: Linux 5.17.5-76051705-generic ehci_hcd [ 1.344246] usb usb2: SerialNumber: ... [ 1.344353] hub 2-0:1.0: USB hub found [ 1.344361] hub 2-0:1.0: 5 ports detected [ 1.344661] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.344666] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.344670] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.344701] ehci-pci 0000:00:16.2: debug port 1 [ 1.344729] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 1.360109] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.360234] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 1.360237] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.360239] usb usb3: Product: EHCI Host Controller [ 1.360241] usb usb3: Manufacturer: Linux 5.17.5-76051705-generic ehci_hcd [ 1.360242] usb usb3: SerialNumber: ... [ 1.360349] hub 3-0:1.0: USB hub found [ 1.360360] hub 3-0:1.0: 4 ports detected [ 1.360519] ehci-platform: EHCI generic platform driver [ 1.360528] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.360531] ohci-pci: OHCI PCI platform driver [ 1.360676] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.360682] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.360705] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 1.424147] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 1.424152] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.424154] usb usb4: Product: OHCI PCI host controller [ 1.424156] usb usb4: Manufacturer: Linux 5.17.5-76051705-generic ohci_hcd [ 1.424157] usb usb4: SerialNumber: ... [ 1.424351] hub 4-0:1.0: USB hub found [ 1.424360] hub 4-0:1.0: 5 ports detected [ 1.424658] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.424665] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.424683] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 1.488146] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 1.488150] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.488153] usb usb5: Product: OHCI PCI host controller [ 1.488154] usb usb5: Manufacturer: Linux 5.17.5-76051705-generic ohci_hcd [ 1.488156] usb usb5: SerialNumber: ... [ 1.488317] hub 5-0:1.0: USB hub found [ 1.488326] hub 5-0:1.0: 5 ports detected [ 1.488619] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.488624] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.488643] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 1.552148] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 1.552153] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.552155] usb usb6: Product: OHCI PCI host controller [ 1.552157] usb usb6: Manufacturer: Linux 5.17.5-76051705-generic ohci_hcd [ 1.552158] usb usb6: SerialNumber: ... [ 1.552319] hub 6-0:1.0: USB hub found [ 1.552332] hub 6-0:1.0: 2 ports detected [ 1.552588] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.552593] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.552616] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 1.616148] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 1.616153] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.616155] usb usb7: Product: OHCI PCI host controller [ 1.616157] usb usb7: Manufacturer: Linux 5.17.5-76051705-generic ohci_hcd [ 1.616158] usb usb7: SerialNumber: ... [ 1.616339] hub 7-0:1.0: USB hub found [ 1.616347] hub 7-0:1.0: 4 ports detected [ 1.616508] ohci-platform: OHCI generic platform driver [ 1.616517] uhci_hcd: USB Universal Host Controller Interface driver [ 1.616563] i8042: PNP: No PS/2 controller found. [ 1.616630] mousedev: PS/2 mouse device common for all mice [ 1.616754] rtc_cmos 00:05: RTC can wake from S4 [ 1.616943] rtc_cmos 00:05: registered as rtc0 [ 1.616966] rtc_cmos 00:05: setting system clock to 2022-05-07T10:13:25 UTC (1651918405) [ 1.616983] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.616993] i2c_dev: i2c /dev entries driver [ 1.617013] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 1.617040] device-mapper: uevent: version 1.0.3 [ 1.617097] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: XXX@XXX [ 1.617119] platform eisa.0: Probing EISA bus 0 [ 1.617122] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.617124] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.617126] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.617128] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.617130] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.617132] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.617133] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.617135] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.617137] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.617138] platform eisa.0: EISA: Detected 0 cards [ 1.617273] ledtrig-cpu: registered to indicate activity on CPUs [ 1.617299] vesafb: mode is 1400x1050x32, linelength=5632, pages=0 [ 1.617301] vesafb: scrolling: redraw [ 1.617302] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.617314] vesafb: framebuffer at 0xc0000000, mapped to 0x(____ptrval____), using 5824k, total 5824k [ 1.617354] fbcon: Deferring console take-over [ 1.617355] fb0: VESA VGA frame buffer device [ 1.617414] drop_monitor: Initializing network drop monitor service [ 1.617603] NET: Registered PF_INET6 protocol family [ 1.621849] Segment Routing with IPv6 [ 1.621860] In-situ OAM (IOAM) with IPv6 [ 1.621883] NET: Registered PF_PACKET protocol family [ 1.621925] Key type dns_resolver registered [ 1.621927] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.622396] microcode: microcode updated early to new patch_level=0x06000852 [ 1.622424] microcode: CPU0: patch_level=0x06000852 [ 1.622430] microcode: CPU1: patch_level=0x06000852 [ 1.622436] microcode: CPU2: patch_level=0x06000852 [ 1.622445] microcode: CPU3: patch_level=0x06000852 [ 1.622454] microcode: CPU4: patch_level=0x06000852 [ 1.622463] microcode: CPU5: patch_level=0x06000852 [ 1.622500] microcode: Microcode Update Driver: v2.2. [ 1.622505] IPI shorthand broadcast: enabled [ 1.622513] sched_clock: Marking stable (1654488256, -31992191)->(1627352484, -4856419) [ 1.622800] registered taskstats version 1 [ 1.622881] Loading compiled-in X.509 certificates [ 1.623888] Loaded X.509 cert 'Build time autogenerated kernel key: 43259f2c5e74ebb974a1060bbaf4487578f3def7' [ 1.624714] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 1.625518] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 1.625520] blacklist: Loading compiled-in revocation X.509 certificates [ 1.625541] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.625985] zswap: loaded using pool lzo/zbud [ 1.626152] Key type ._fscrypt registered [ 1.626153] Key type .fscrypt registered [ 1.626154] Key type fscrypt-provisioning registered [ 1.629706] Key type encrypted registered [ 1.629711] AppArmor: AppArmor sha1 policy hashing enabled [ 1.629718] ima: No TPM chip found, activating TPM-bypass! [ 1.629722] Loading compiled-in module X.509 certificates [ 1.630531] Loaded X.509 cert 'Build time autogenerated kernel key: 43259f2c5e74ebb974a1060bbaf4487578f3def7' [ 1.630534] ima: Allocated hash algorithm: sha1 [ 1.630541] ima: No architecture policies found [ 1.630550] evm: Initialising EVM extended attributes: [ 1.630551] evm: security.selinux [ 1.630552] evm: security.SMACK64 [ 1.630553] evm: security.SMACK64EXEC [ 1.630554] evm: security.SMACK64TRANSMUTE [ 1.630554] evm: security.SMACK64MMAP [ 1.630555] evm: security.apparmor [ 1.630556] evm: security.ima [ 1.630557] evm: security.capability [ 1.630558] evm: HMAC attrs: 0x1 [ 1.632500] PM: Magic number: 6:745:223 [ 1.632870] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.633230] RAS: Correctable Errors collector initialized. [ 1.635535] Freeing unused decrypted memory: 2036K [ 1.636366] Freeing unused kernel image (initmem) memory: 2768K [ 1.660122] Write protecting the kernel read-only data: 30720k [ 1.660906] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.661403] Freeing unused kernel image (rodata/data gap) memory: 1376K [ 1.719544] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.719566] Run /init as init process [ 1.719568] with arguments: [ 1.719570] /init [ 1.719571] splash [ 1.719572] with environment: [ 1.719573] HOME=/ [ 1.719574] TERM=linux [ 1.719575] BOOT_IMAGE=/boot/vmlinuz-5.17.5-76051705-generic [ 1.857752] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.857765] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 1.858291] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.858594] cryptd: max_cpu_qlen set to 1000 [ 1.858682] ACPI: bus type drm_connector registered [ 1.866404] scsi host0: pata_atiixp [ 1.868296] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.868305] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 1.868372] xhci_hcd 0000:02:00.0: hcc params 0x040040a5 hci version 0x100 quirks 0x0000000000000010 [ 1.868640] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.869206] scsi host1: pata_atiixp [ 1.869272] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.869275] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.869290] ahci 0000:00:11.0: version 3.0 [ 1.869504] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.869509] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs [ 1.870352] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 1.870355] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.870358] usb usb8: Product: xHCI Host Controller [ 1.870360] usb usb8: Manufacturer: Linux 5.17.5-76051705-generic xhci-hcd [ 1.870362] usb usb8: SerialNumber: ... [ 1.870527] hub 8-0:1.0: USB hub found [ 1.870540] hub 8-0:1.0: 4 ports detected [ 1.872255] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.872261] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 1.872266] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 1.872334] scsi host2: ahci [ 1.872454] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.872671] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17 [ 1.872675] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.872678] usb usb9: Product: xHCI Host Controller [ 1.872680] usb usb9: Manufacturer: Linux 5.17.5-76051705-generic xhci-hcd [ 1.872682] usb usb9: SerialNumber: ... [ 1.876154] hub 9-0:1.0: USB hub found [ 1.876170] hub 9-0:1.0: 4 ports detected [ 1.876214] scsi host3: ahci [ 1.877272] AVX version of gcm_enc/dec engaged. [ 1.877331] AES CTR mode by8 optimization enabled [ 1.877550] scsi host4: ahci [ 1.878001] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl, XX:XX:XX:XX:XX:XX, XID 2c9, IRQ 32 [ 1.878006] r8169 0000:05:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 1.878456] scsi host5: ahci [ 1.878548] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 1.878552] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 1.878556] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 1.878558] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 1.888088] usb 4-1: new full-speed USB device number 2 using ohci-pci [ 1.932126] firewire_ohci 0000:03:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 2.109246] usb 4-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice= 1.34 [ 2.109257] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.128095] usb 8-1: new high-speed USB device number 2 using xhci_hcd [ 2.191130] ata6: SATA link down (SStatus 0 SControl 300) [ 2.191168] ata4: SATA link down (SStatus 0 SControl 300) [ 2.191206] ata5: SATA link down (SStatus 0 SControl 300) [ 2.277285] usb 8-1: New USB device found, idVendor=214b, idProduct=7000, bcdDevice= 1.00 [ 2.277297] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 2.277302] usb 8-1: Product: USB2.0 HUB [ 2.278378] hub 8-1:1.0: USB hub found [ 2.278659] hub 8-1:1.0: 4 ports detected [ 2.356102] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.356229] ata3.00: ATA-11: SPCC Solid State Disk, SBFM61.3, max UDMA/133 [ 2.356267] ata3.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.356503] ata3.00: configured for UDMA/133 [ 2.356828] scsi 2:0:0:0: Direct-Access ATA SPCC Solid State 61.3 PQ: 0 ANSI: 5 [ 2.357351] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.357515] sd 2:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 2.357541] sd 2:0:0:0: [sda] Write Protect is off [ 2.357546] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.357590] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.376766] sda: sda1 sda2 [ 2.396415] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.402288] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 2.408049] usb 8-2: new high-speed USB device number 3 using xhci_hcd [ 2.464226] firewire_core 0000:03:05.0: created device fw0: GUID 001fb50100030fcc, S400 [ 2.496366] [drm] radeon kernel modesetting enabled. [ 2.496471] checking generic (c0000000 5b0000) vs hw (c0000000 10000000) [ 2.496481] fb0: switching to radeon from VESA VGA [ 2.496726] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 2.497225] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x174B:0x1482 0x00). [ 2.497405] ATOM BIOS: JUNIPER [ 2.497484] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 2.497495] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 2.497507] [drm] Detected VRAM RAM=1024M, BAR=256M [ 2.497510] [drm] RAM width 128bits DDR [ 2.497549] [drm] radeon: 1024M of VRAM memory ready [ 2.497552] [drm] radeon: 1024M of GTT memory ready. [ 2.497583] [drm] Loading JUNIPER Microcode [ 2.497781] [drm] Internal thermal controller with fan control [ 2.521250] [drm] radeon: dpm initialized [ 2.521399] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.523597] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 2.545983] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 2.546108] radeon 0000:01:00.0: WB enabled [ 2.546115] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [ 2.546123] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [ 2.549082] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [ 2.549629] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 2.549736] radeon 0000:01:00.0: radeon: using MSI. [ 2.549785] [drm] radeon: irq initialized. [ 2.566398] [drm] ring test on 0 succeeded in 1 usecs [ 2.566407] [drm] ring test on 3 succeeded in 2 usecs [ 2.567036] usb 8-2: New USB device found, idVendor=0c45, idProduct=64ab, bcdDevice= 5.27 [ 2.567047] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.567054] usb 8-2: Product: Integrated Camera [ 2.567059] usb 8-2: Manufacturer: 9726-200527 [ 2.636094] usb 8-1.1: new high-speed USB device number 4 using xhci_hcd [ 2.684020] usb 4-2: new low-speed USB device number 3 using ohci-pci [ 2.741271] usb 8-1.1: New USB device found, idVendor=214b, idProduct=7000, bcdDevice= 1.00 [ 2.741283] usb 8-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 2.741289] usb 8-1.1: Product: USB2.0 HUB [ 2.742226] [drm] ring test on 5 succeeded in 1 usecs [ 2.742233] [drm] UVD initialized successfully. [ 2.742359] hub 8-1.1:1.0: USB hub found [ 2.742503] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.742550] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.742642] hub 8-1.1:1.0: 4 ports detected [ 2.892523] [drm] ib test on ring 5 succeeded [ 2.893438] [drm] Radeon Display Connectors [ 2.893439] [drm] Connector 0: [ 2.893440] [drm] DP-1 [ 2.893441] [drm] HPD4 [ 2.893442] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 2.893444] [drm] Encoders: [ 2.893445] [drm] DFP1: INTERNAL_UNIPHY2 [ 2.893446] [drm] Connector 1: [ 2.893447] [drm] HDMI-A-1 [ 2.893448] [drm] HPD5 [ 2.893448] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 2.893450] [drm] Encoders: [ 2.893451] [drm] DFP2: INTERNAL_UNIPHY2 [ 2.893452] [drm] Connector 2: [ 2.893453] [drm] DVI-I-1 [ 2.893453] [drm] HPD1 [ 2.893454] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 2.893456] [drm] Encoders: [ 2.893456] [drm] DFP3: INTERNAL_UNIPHY1 [ 2.893457] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 2.893458] [drm] Connector 3: [ 2.893459] [drm] DVI-I-2 [ 2.893460] [drm] HPD6 [ 2.893460] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 2.893462] [drm] Encoders: [ 2.893463] [drm] DFP4: INTERNAL_UNIPHY [ 2.893463] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.189183] usb 4-2: New USB device found, idVendor=3938, idProduct=1080, bcdDevice= 3.11 [ 3.189187] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.189190] usb 4-2: Product: 2.4G Wireless Device [ 3.189191] usb 4-2: Manufacturer: YK [ 3.201919] hid: raw HID events driver (C) Jiri Kosina [ 3.219534] usbcore: registered new interface driver usbhid [ 3.219542] usbhid: USB HID core driver [ 3.224993] input: YK 2.4G Wireless Device Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:3938:1080.0001/input/input2 [ 3.225263] input: YK 2.4G Wireless Device System Control as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:3938:1080.0001/input/input3 [ 3.284397] input: YK 2.4G Wireless Device Consumer Control as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:3938:1080.0001/input/input4 [ 3.284576] hid-generic 0003:3938:1080.0001: input,hidraw0: USB HID v2.00 Mouse [YK 2.4G Wireless Device] on usb-0000:00:12.0-2/input0 [ 3.285095] input: YK 2.4G Wireless Device as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:3938:1080.0002/input/input5 [ 3.299718] [drm] fb mappable at 0xC034D000 [ 3.299722] [drm] vram apper at 0xC0000000 [ 3.299723] [drm] size 8294400 [ 3.299724] [drm] fb depth is 24 [ 3.299725] [drm] pitch is 7680 [ 3.299870] fbcon: radeondrmfb (fb0) is primary device [ 3.299872] fbcon: Deferring console take-over [ 3.299873] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device [ 3.324176] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 3.330907] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 3.344235] hid-generic 0003:3938:1080.0002: input,hidraw1: USB HID v2.00 Keyboard [YK 2.4G Wireless Device] on usb-0000:00:12.0-2/input1 [ 3.494691] [drm] amdgpu kernel modesetting enabled. [ 3.494843] amdgpu: CRAT table not found [ 3.494847] amdgpu: Virtual CRAT table created for CPU [ 3.494859] amdgpu: Topology: Add CPU node [ 3.512133] usb 1-4: new high-speed USB device number 4 using ehci-pci [ 3.669469] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.37 [ 3.669481] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 3.669486] usb 1-4: Product: USB2.0 Hub [ 3.670048] hub 1-4:1.0: USB hub found [ 3.670340] hub 1-4:1.0: 4 ports detected [ 3.772451] random: fast init done [ 3.956111] usb 1-4.4: new low-speed USB device number 5 using ehci-pci [ 4.070166] usb 1-4.4: New USB device found, idVendor=1a2c, idProduct=0e24, bcdDevice= 1.10 [ 4.070177] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.070183] usb 1-4.4: Product: USB Keyboard [ 4.070187] usb 1-4.4: Manufacturer: SEM [ 4.074746] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/0003:1A2C:0E24.0003/input/input6 [ 4.132294] hid-generic 0003:1A2C:0E24.0003: input,hidraw2: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:12.2-4.4/input0 [ 4.135717] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.1/0003:1A2C:0E24.0004/input/input7 [ 4.192343] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.1/0003:1A2C:0E24.0004/input/input8 [ 4.192527] hid-generic 0003:1A2C:0E24.0004: input,hidraw3: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:12.2-4.4/input1 [ 4.347710] system76_acpi: loading out-of-tree module taints kernel. [ 4.347771] system76_acpi: module verification failed: signature and/or required key missing - tainting kernel [ 4.357772] system76: Model does not utilize this driver [ 4.421919] usbcore: registered new interface driver system76-io [ 4.532032] raid6: sse2x4 gen() 7049 MB/s [ 4.600030] raid6: sse2x2 gen() 7125 MB/s [ 4.668034] raid6: sse2x1 gen() 5434 MB/s [ 4.668036] raid6: using algorithm sse2x2 gen() 7125 MB/s [ 4.736032] raid6: .... xor() 5875 MB/s, rmw enabled [ 4.736034] raid6: using ssse3x2 recovery algorithm [ 4.737274] xor: automatically using best checksumming function avx [ 4.738353] async_tx: api initialized (async) [ 4.845983] random: lvm: uninitialized urandom read (4 bytes read) [ 5.034139] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 5.393855] systemd[1]: Inserted module 'autofs4' [ 5.439614] systemd[1]: systemd 248.3-1ubuntu8.6~1650893010~21.10~9a0cd5e running in system mode. (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 5.456204] systemd[1]: Detected architecture x86-64. [ 5.456749] systemd[1]: Hostname set to ... [ 5.874042] random: lvmconfig: uninitialized urandom read (4 bytes read) [ 6.007033] systemd[1]: Queued start job for default target Graphical Interface. [ 6.007302] random: systemd: uninitialized urandom read (16 bytes read) [ 6.008228] systemd[1]: Created slice system-modprobe.slice. [ 6.008296] random: systemd: uninitialized urandom read (16 bytes read) [ 6.008575] systemd[1]: Created slice Cryptsetup Units Slice. [ 6.008872] systemd[1]: Created slice User and Session Slice. [ 6.008952] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.009156] systemd[1]: Set up automount ... [ 6.009245] systemd[1]: Reached target User and Group Name Lookups. [ 6.009273] systemd[1]: Reached target Remote File Systems. [ 6.009294] systemd[1]: Reached target Slices. [ 6.009331] systemd[1]: Reached target System Time Set. [ 6.009390] systemd[1]: Reached target Local Verity Integrity Protected Volumes. [ 6.009488] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 6.009608] systemd[1]: Listening on LVM2 poll daemon socket. [ 6.010030] systemd[1]: Listening on Syslog Socket. [ 6.010101] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.010313] systemd[1]: Listening on Journal Audit Socket. [ 6.010419] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.010557] systemd[1]: Listening on Journal Socket. [ 6.010718] systemd[1]: Listening on udev Control Socket. [ 6.010836] systemd[1]: Listening on udev Kernel Socket. [ 6.011713] systemd[1]: Mounting Huge Pages File System... [ 6.012636] systemd[1]: Mounting POSIX Message Queue File System... [ 6.013632] systemd[1]: Mounting Kernel Debug File System... [ 6.014821] systemd[1]: Mounting Kernel Trace File System... [ 6.016940] systemd[1]: Starting Journal Service... [ 6.017229] systemd[1]: Finished Availability of block devices. [ 6.018758] systemd[1]: Starting Set the console keyboard layout... [ 6.019887] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 6.021020] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 6.022124] systemd[1]: Starting Load Kernel Module configfs... [ 6.023243] systemd[1]: Starting Load Kernel Module drm... [ 6.024447] systemd[1]: Starting Load Kernel Module fuse... [ 6.025611] systemd[1]: Started Nameserver information manager. [ 6.025789] systemd[1]: Reached target Network (Pre). [ 6.029051] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.036517] systemd[1]: Starting Load Kernel Modules... [ 6.037703] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.038910] systemd[1]: Starting Coldplug All udev Devices... [ 6.040151] systemd[1]: Starting Uncomplicated firewall... [ 6.044309] systemd[1]: Mounted Huge Pages File System. [ 6.044485] systemd[1]: Mounted POSIX Message Queue File System. [ 6.044618] systemd[1]: Mounted Kernel Debug File System. [ 6.044770] systemd[1]: Mounted Kernel Trace File System. [ 6.045259] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 6.045718] systemd[1]: XXX@XXX: Deactivated successfully. [ 6.046103] systemd[1]: Finished Load Kernel Module configfs. [ 6.046490] systemd[1]: XXX@XXX: Deactivated successfully. [ 6.046886] systemd[1]: Finished Load Kernel Module drm. [ 6.047292] systemd[1]: XXX@XXX: Deactivated successfully. [ 6.047654] systemd[1]: Finished Load Kernel Module fuse. [ 6.049364] EXT4-fs (sda1): re-mounted. Quota mode: none. [ 6.049502] systemd[1]: Mounting FUSE Control File System... [ 6.050963] systemd[1]: Mounting Kernel Configuration File System... [ 6.053706] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.053900] systemd[1]: Mounted FUSE Control File System. [ 6.054031] systemd[1]: Mounted Kernel Configuration File System. [ 6.064460] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 6.064508] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.065418] systemd[1]: Starting Load/Save Random Seed... [ 6.066329] systemd[1]: Starting Create System Users... [ 6.066921] systemd[1]: Finished Uncomplicated firewall. [ 6.081401] lp: driver loaded but no devices found [ 6.085716] ppdev: user-space parallel port driver [ 6.086049] systemd[1]: Finished Create System Users. [ 6.087185] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.099660] IPMI message handler: version 39.2 [ 6.101536] ipmi device interface [ 6.102985] systemd[1]: Finished Load Kernel Modules. [ 6.104229] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.105502] systemd[1]: Starting Apply Kernel Variables... [ 6.107423] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 6.114942] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 6.118425] systemd[1]: Started Journal Service. [ 6.127615] systemd-journald[401]: Received client request to flush runtime journal. [ 6.741364] mc: Linux media interface: v0.10 [ 6.745650] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.753648] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.758891] videodev: Linux video capture interface: v2.00 [ 6.808421] Bluetooth: Core ver 2.22 [ 6.808451] NET: Registered PF_BLUETOOTH protocol family [ 6.808453] Bluetooth: HCI device and connection manager initialized [ 6.808459] Bluetooth: HCI socket layer initialized [ 6.808462] Bluetooth: L2CAP socket layer initialized [ 6.808468] Bluetooth: SCO socket layer initialized [ 6.846353] SVM: TSC scaling supported [ 6.846358] kvm: Nested Virtualization enabled [ 6.846360] SVM: kvm: Nested Paging enabled [ 6.846368] SVM: LBR virtualization supported [ 6.869746] usb 8-2: Found UVC 1.00 device Integrated Camera (0c45:64ab) [ 6.875320] MCE: In-kernel MCE decoding enabled. [ 6.883904] usb 8-2: Failed to query (GET_INFO) UVC control 3 on unit 1: -32 (exp. 1). [ 6.885476] usbcore: registered new interface driver btusb [ 6.893274] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once... [ 6.893284] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround [ 6.896299] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb8/8-2/8-2:1.0/input/input9 [ 6.896418] usbcore: registered new interface driver uvcvideo [ 7.040126] ath: EEPROM regdomain: 0x37 [ 7.040130] ath: EEPROM indicates we should expect a direct regpair map [ 7.040132] ath: Country alpha2 being used: AL [ 7.040133] ath: Regpair used: 0x37 [ 7.041410] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 7.042356] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffb2dc008a0000, irq=16 [ 7.088334] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0 [ 7.102154] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 7.129968] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 7.129975] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.129978] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 7.129980] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 7.129981] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 7.129983] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 7.129985] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 7.129986] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 7.129988] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 7.161005] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 7.161121] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 7.161203] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 7.161274] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 7.161355] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 7.161422] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 7.161521] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 7.161576] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 7.888030] random: crng init done [ 7.888035] random: 6 urandom warning(s) missed due to ratelimiting [ 7.993561] Adding 4193784k swap on /dev/mapper/XXXXXXXXXX Priority:-2 extents:1 across:4193784k SSFS [ 8.376738] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.376743] Bluetooth: BNEP filters: protocol multicast [ 8.376748] Bluetooth: BNEP socket layer initialized [ 8.574783] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [ 8.835219] r8169 0000:05:00.0 enp5s0: Link is Down [ 8.876075] Dynamic Preempt: full [ 8.919802] Dynamic Preempt: full [ 11.191666] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 11.191689] wlp4s0: 80 MHz not supported, disabling VHT [ 11.201675] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 11.211748] wlp4s0: authenticated [ 11.216030] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 11.268047] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [ 11.268189] wlp4s0: associated [ 11.348162] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 12.464765] rfkill: input handler disabled [ 14.899341] vboxdrv: Found 6 processor cores [ 14.916325] vboxdrv: TSC mode is Invariant, tentative frequency 3400548547 Hz [ 14.916329] vboxdrv: Successfully loaded version 6.1.32_Ubuntu r149290 (interface 0x00320000) [ 14.926261] VBoxNetFlt: Successfully started. [ 14.935354] VBoxNetAdp: Successfully started. [ 15.560548] ================================================================================ [ 15.560560] UBSAN: invalid-load in /build/linux-Dqg4j2/linux-5.17.5/net/mac80211/status.c:1164:21 [ 15.560568] load of value 255 is not a valid value for type '_Bool' [ 15.560574] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G OE 5.17.5-76051705-generic #202204271406~1651504840~21.10~63e51bd [ 15.560581] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./970 Extreme3 R2.0, BIOS P2.60 05/31/2016 [ 15.560585] Call Trace: [ 15.560589] <IRQ> [ 15.560594] show_stack+0x52/0x58 [ 15.560606] dump_stack_lvl+0x4c/0x63 [ 15.560616] dump_stack+0x10/0x12 [ 15.560621] ubsan_epilogue+0x9/0x45 [ 15.560626] __ubsan_handle_load_invalid_value.cold+0x44/0x49 [ 15.560632] ? kmem_cache_free+0x3ef/0x450 [ 15.560640] ieee80211_tx_status_ext.cold+0x4e/0x5f [mac80211] [ 15.560802] ath_txq_unlock_complete+0xdc/0x170 [ath9k] [ 15.560827] ath_tx_edma_tasklet+0xe5/0x4d0 [ath9k] [ 15.560850] ? del_timer_sync+0x6c/0xb0 [ 15.560858] ath9k_tasklet+0x14e/0x290 [ath9k] [ 15.560878] tasklet_action_common.constprop.0+0xc0/0xf0 [ 15.560887] tasklet_action+0x22/0x30 [ 15.560893] __do_softirq+0xd9/0x315 [ 15.560900] __irq_exit_rcu+0x87/0xb0 [ 15.560906] irq_exit_rcu+0xe/0x10 [ 15.560912] common_interrupt+0x8a/0xa0 [ 15.560919] </IRQ> [ 15.560920] <TASK> [ 15.560923] asm_common_interrupt+0x1e/0x40 [ 15.560931] RIP: 0010:native_safe_halt+0xb/0x10 [ 15.560940] Code: 2e ff 5b 41 5c 41 5d 5d c3 4c 89 ee 48 c7 c7 40 44 e5 b7 e8 57 4b 8e ff eb ce cc cc cc cc cc eb 07 0f 00 2d 89 1d 48 00 fb f4 <c3> 0f 1f 40 00 eb 07 0f 00 2d 79 1d 48 00 f4 c3 cc cc cc cc cc 0f [ 15.560945] RSP: 0018:ffffb2dc000b7dd0 EFLAGS: 00000246 [ 15.560951] RAX: 0000000000004000 RBX: 000000000002e388 RCX: 000000000000001f [ 15.560956] RDX: ffff9493b2cc0000 RSI: ffff94918088f000 RDI: ffff94918088f064 [ 15.560960] RBP: ffffb2dc000b7dd8 R08: 000000039f790ea3 R09: 0000000000030d40 [ 15.560963] R10: 0000000000000003 R11: 071c71c71c71c71c R12: 0000000000000001 [ 15.560967] R13: 0000000000000003 R14: ffff94918088f064 R15: ffffffffb80f5ec0 [ 15.560975] ? acpi_idle_do_entry+0x4d/0x60 [ 15.560982] acpi_idle_enter+0xc2/0x160 [ 15.560988] ? rcu_dynticks_eqs_enter+0xe/0x10 [ 15.560995] cpuidle_enter_state+0x9a/0x630 [ 15.561003] ? raw_spin_rq_unlock+0x10/0x30 [ 15.561011] cpuidle_enter+0x2e/0x40 [ 15.561018] cpuidle_idle_call+0x13e/0x1d0 [ 15.561024] do_idle+0x83/0xf0 [ 15.561028] cpu_startup_entry+0x20/0x30 [ 15.561033] start_secondary+0x12a/0x180 [ 15.561040] secondary_startup_64_no_verify+0xd5/0xdb [ 15.561050] </TASK> [ 15.561054] ================================================================================ [ 20.292082] Bluetooth: RFCOMM TTY layer initialized [ 20.292093] Bluetooth: RFCOMM socket layer initialized [ 20.292098] Bluetooth: RFCOMM ver 1.11 [ 20.456053] rfkill: input handler enabled [ 25.159455] rfkill: input handler disabled [ 312.493918] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [ 4042.920198] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 4043.146888] PM: suspend entry (deep) [ 4043.154644] Filesystems sync: 0.007 seconds [ 4043.205852] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 4043.209201] OOM killer disabled. [ 4043.209202] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4043.210644] printk: Suspending console(s) (use no_console_suspend to debug) [ 4043.211525] serial 00:08: disabled [ 4043.241537] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 4043.241585] sd 2:0:0:0: [sda] Stopping disk [ 4045.629531] ACPI: PM: Preparing to enter system sleep state S3 [ 4045.629653] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 4046.045838] ACPI: PM: Saving platform NVS memory [ 4046.045963] Disabling non-boot CPUs ... [ 4046.048562] smpboot: CPU 1 is now offline [ 4046.050911] smpboot: CPU 2 is now offline [ 4046.053288] smpboot: CPU 3 is now offline [ 4046.056015] smpboot: CPU 4 is now offline [ 4046.057807] smpboot: CPU 5 is now offline [ 4046.058952] ACPI: PM: Low-level resume complete [ 4046.058972] ACPI: PM: Restoring platform NVS memory [ 4046.059065] PCI-DMA: Resuming GART IOMMU [ 4046.059066] PCI-DMA: Restoring GART aperture settings [ 4046.059071] LVT offset 0 assigned for vector 0x400 [ 4046.065470] microcode: reload patch_level=0x06000852 [ 4046.065529] Enabling non-boot CPUs ... [ 4046.065580] x86: Booting SMP configuration: [ 4046.065581] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 4046.066407] microcode: CPU1: patch_level=0x06000852 [ 4046.068632] ACPI: \_PR_.P002: Found 2 idle states [ 4046.069073] CPU1 is up [ 4046.069134] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 4046.075899] microcode: CPU2: patch_level=0x06000852 [ 4046.078139] ACPI: \_PR_.P003: Found 2 idle states [ 4046.078583] CPU2 is up [ 4046.078645] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 4046.079519] microcode: CPU3: patch_level=0x06000852 [ 4046.081753] ACPI: \_PR_.P004: Found 2 idle states [ 4046.082255] CPU3 is up [ 4046.082287] smpboot: Booting Node 0 Processor 4 APIC 0x14 [ 4046.089156] microcode: CPU4: patch_level=0x06000852 [ 4046.091369] ACPI: \_PR_.P005: Found 2 idle states [ 4046.091941] CPU4 is up [ 4046.091973] smpboot: Booting Node 0 Processor 5 APIC 0x15 [ 4046.092848] microcode: CPU5: patch_level=0x06000852 [ 4046.095098] ACPI: \_PR_.P006: Found 2 idle states [ 4046.095798] CPU5 is up [ 4046.104901] ACPI: PM: Waking up from system sleep state S3 [ 4046.163991] sd 2:0:0:0: [sda] Starting disk [ 4046.165485] serial 00:08: activated [ 4046.219021] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 4046.231661] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 4046.231752] radeon 0000:01:00.0: WB enabled [ 4046.231754] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [ 4046.231757] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [ 4046.234746] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [ 4046.234896] debugfs: File 'radeon_ring_gfx' in directory '0' already present! [ 4046.234900] debugfs: File 'radeon_ring_dma1' in directory '0' already present! [ 4046.250957] [drm] ring test on 0 succeeded in 1 usecs [ 4046.250962] [drm] ring test on 3 succeeded in 2 usecs [ 4046.250964] debugfs: File 'radeon_ring_uvd' in directory '0' already present! [ 4046.426657] [drm] ring test on 5 succeeded in 1 usecs [ 4046.426663] [drm] UVD initialized successfully. [ 4046.426721] [drm] ib test on ring 0 succeeded in 0 usecs [ 4046.426775] [drm] ib test on ring 3 succeeded in 0 usecs [ 4046.476673] ata6: SATA link down (SStatus 0 SControl 300) [ 4046.477757] ata5: SATA link down (SStatus 0 SControl 300) [ 4046.477797] ata4: SATA link down (SStatus 0 SControl 300) [ 4046.576748] [drm] ib test on ring 5 succeeded [ 4046.590453] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large: [ 4046.590457] clocksource: 'hpet' wd_nsec: 511137309 wd_now: 70fe41 wd_last: 15225 mask: ffffffff [ 4046.590460] clocksource: 'tsc' cs_nsec: 524951428 cs_now: 17d2672bf cs_last: 112bfa24d mask: ffffffffffffffff [ 4046.590462] clocksource: 'tsc' is current clocksource. [ 4046.590463] tsc: Marking TSC unstable due to clocksource watchdog [ 4046.638471] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4046.638780] ata3.00: configured for UDMA/133 [ 4046.687430] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 4046.687431] sched_clock: Marking unstable (4046656983184, 29328842)<-(4046692286528, -4856419) [ 4046.686475] clocksource: Checking clocksource tsc synchronization from CPU 0 to CPUs 1,5. [ 4046.686511] clocksource: Switched to clocksource hpet [ 4046.745367] firewire_core 0000:03:05.0: rediscovered device fw0 [ 4046.746741] fbcon: Taking over console [ 4046.746759] OOM killer enabled. [ 4046.746760] Restarting tasks ... done. [ 4046.768378] Console: switching to colour frame buffer device 240x67 [ 4046.769503] rfkill: input handler enabled [ 4046.818498] PM: suspend exit [ 4047.083691] rfkill: input handler disabled [ 4047.089270] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [ 4047.351777] r8169 0000:05:00.0 enp5s0: Link is Down [ 4049.652040] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 4049.652068] wlp4s0: 80 MHz not supported, disabling VHT [ 4049.661880] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 4049.671817] wlp4s0: authenticated [ 4049.677363] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 4049.728431] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [ 4049.728578] wlp4s0: associated [ 4049.817634] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 4352.331184] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 1 (2462.000/0 MHz) [ 4952.298683] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [ 5020.051321] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 5020.274228] PM: suspend entry (deep) [ 5020.282459] Filesystems sync: 0.008 seconds [ 5020.357353] rfkill: input handler enabled [ 5020.391376] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 5020.394830] OOM killer disabled. [ 5020.394832] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5020.396177] printk: Suspending console(s) (use no_console_suspend to debug) [ 5020.397125] serial 00:08: disabled [ 5020.421476] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 5020.421638] sd 2:0:0:0: [sda] Stopping disk [ 5022.377434] ACPI: PM: Preparing to enter system sleep state S3 [ 5023.001939] ACPI: PM: Saving platform NVS memory [ 5023.002087] Disabling non-boot CPUs ... [ 5023.004665] smpboot: CPU 1 is now offline [ 5023.006615] smpboot: CPU 2 is now offline [ 5023.008908] smpboot: CPU 3 is now offline [ 5023.011442] smpboot: CPU 4 is now offline [ 5023.013222] smpboot: CPU 5 is now offline [ 5023.013400] ACPI: PM: Low-level resume complete [ 5023.013400] ACPI: PM: Restoring platform NVS memory [ 5023.013400] PCI-DMA: Resuming GART IOMMU [ 5023.013400] PCI-DMA: Restoring GART aperture settings [ 5023.013400] LVT offset 0 assigned for vector 0x400 [ 5023.013400] microcode: reload patch_level=0x06000852 [ 5023.019691] Enabling non-boot CPUs ... [ 5023.019742] x86: Booting SMP configuration: [ 5023.019743] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 5023.003819] microcode: CPU1: patch_level=0x06000852 [ 5023.020776] ACPI: \_PR_.P002: Found 2 idle states [ 5023.021189] CPU1 is up [ 5023.021638] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 5023.020644] microcode: CPU2: patch_level=0x06000852 [ 5023.028418] ACPI: \_PR_.P003: Found 2 idle states [ 5023.028846] CPU2 is up [ 5023.028880] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 5023.028356] microcode: CPU3: patch_level=0x06000852 [ 5023.029994] ACPI: \_PR_.P004: Found 2 idle states [ 5023.030481] CPU3 is up [ 5023.030514] smpboot: Booting Node 0 Processor 4 APIC 0x14 [ 5023.029849] microcode: CPU4: patch_level=0x06000852 [ 5023.037457] ACPI: \_PR_.P005: Found 2 idle states [ 5023.038039] CPU4 is up [ 5023.038068] smpboot: Booting Node 0 Processor 5 APIC 0x15 [ 5023.037324] microcode: CPU5: patch_level=0x06000852 [ 5023.039181] ACPI: \_PR_.P006: Found 2 idle states [ 5023.039843] CPU5 is up [ 5023.048747] ACPI: PM: Waking up from system sleep state S3 [ 5023.115122] sd 2:0:0:0: [sda] Starting disk [ 5023.116248] serial 00:08: activated [ 5023.168598] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 5023.180907] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 5023.180997] radeon 0000:01:00.0: WB enabled [ 5023.181000] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [ 5023.181002] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [ 5023.183884] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [ 5023.184029] debugfs: File 'radeon_ring_gfx' in directory '0' already present! [ 5023.184033] debugfs: File 'radeon_ring_dma1' in directory '0' already present! [ 5023.199651] [drm] ring test on 0 succeeded in 1 usecs [ 5023.199657] [drm] ring test on 3 succeeded in 3 usecs [ 5023.199659] debugfs: File 'radeon_ring_uvd' in directory '0' already present! [ 5023.370700] [drm] ring test on 5 succeeded in 1 usecs [ 5023.370705] [drm] UVD initialized successfully. [ 5023.370757] [drm] ib test on ring 0 succeeded in 0 usecs [ 5023.370821] [drm] ib test on ring 3 succeeded in 0 usecs [ 5023.427614] ata5: SATA link down (SStatus 0 SControl 300) [ 5023.428132] ata4: SATA link down (SStatus 0 SControl 300) [ 5023.431256] ata6: SATA link down (SStatus 0 SControl 300) [ 5023.516895] [drm] ib test on ring 5 succeeded [ 5023.593364] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5023.593683] ata3.00: configured for UDMA/133 [ 5023.705439] firewire_core 0000:03:05.0: rediscovered device fw0 [ 5023.705634] OOM killer enabled. [ 5023.706538] Restarting tasks ... done. [ 5023.724608] PM: suspend exit [ 5023.999306] rfkill: input handler disabled [ 5024.003479] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [ 5024.251780] r8169 0000:05:00.0 enp5s0: Link is Down [ 5026.591944] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 5026.591975] wlp4s0: 80 MHz not supported, disabling VHT [ 5026.601769] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 5026.613467] wlp4s0: authenticated [ 5026.617353] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 5026.668409] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=3) [ 5026.668518] wlp4s0: associated [ 5026.725572] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 5329.151502] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 1 (2462.000/0 MHz) [ 6163.335338] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6163.555888] PM: suspend entry (deep) [ 6163.565385] Filesystems sync: 0.009 seconds [ 6163.620010] rfkill: input handler enabled [ 6163.641017] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 6163.644524] OOM killer disabled. [ 6163.644525] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 6163.645542] printk: Suspending console(s) (use no_console_suspend to debug) [ 6163.646409] serial 00:08: disabled [ 6163.685412] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 6163.685583] sd 2:0:0:0: [sda] Stopping disk [ 6166.373423] ACPI: PM: Preparing to enter system sleep state S3 [ 6166.997816] ACPI: PM: Saving platform NVS memory [ 6166.997933] Disabling non-boot CPUs ... [ 6167.000495] smpboot: CPU 1 is now offline [ 6167.002688] smpboot: CPU 2 is now offline [ 6167.004989] smpboot: CPU 3 is now offline [ 6167.007688] smpboot: CPU 4 is now offline [ 6167.009452] smpboot: CPU 5 is now offline [ 6167.009489] ACPI: PM: Low-level resume complete [ 6167.009489] ACPI: PM: Restoring platform NVS memory [ 6167.009489] PCI-DMA: Resuming GART IOMMU [ 6167.009489] PCI-DMA: Restoring GART aperture settings [ 6167.009489] LVT offset 0 assigned for vector 0x400 [ 6167.009489] microcode: reload patch_level=0x06000852 [ 6167.016481] Enabling non-boot CPUs ... [ 6167.016532] x86: Booting SMP configuration: [ 6167.016533] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 6167.016475] microcode: CPU1: patch_level=0x06000852 [ 6167.017623] ACPI: \_PR_.P002: Found 2 idle states [ 6167.018034] CPU1 is up [ 6167.018140] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 6167.017492] microcode: CPU2: patch_level=0x06000852 [ 6167.024921] ACPI: \_PR_.P003: Found 2 idle states [ 6167.025363] CPU2 is up [ 6167.025404] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 6167.024791] microcode: CPU3: patch_level=0x06000852 [ 6167.026501] ACPI: \_PR_.P004: Found 2 idle states [ 6167.026985] CPU3 is up [ 6167.027024] smpboot: Booting Node 0 Processor 4 APIC 0x14 [ 6167.033344] microcode: CPU4: patch_level=0x06000852 [ 6167.033847] ACPI: \_PR_.P005: Found 2 idle states [ 6167.034433] CPU4 is up [ 6167.034474] smpboot: Booting Node 0 Processor 5 APIC 0x15 [ 6167.033685] microcode: CPU5: patch_level=0x06000852 [ 6167.035592] ACPI: \_PR_.P006: Found 2 idle states [ 6167.036282] CPU5 is up [ 6167.045154] ACPI: PM: Waking up from system sleep state S3 [ 6167.107304] sd 2:0:0:0: [sda] Starting disk [ 6167.108206] serial 00:08: activated [ 6167.160492] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 6167.172809] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 6167.172899] radeon 0000:01:00.0: WB enabled [ 6167.172902] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [ 6167.172904] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [ 6167.175785] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [ 6167.175969] debugfs: File 'radeon_ring_gfx' in directory '0' already present! [ 6167.175972] debugfs: File 'radeon_ring_dma1' in directory '0' already present! [ 6167.191590] [drm] ring test on 0 succeeded in 1 usecs [ 6167.191596] [drm] ring test on 3 succeeded in 2 usecs [ 6167.191598] debugfs: File 'radeon_ring_uvd' in directory '0' already present! [ 6167.362663] [drm] ring test on 5 succeeded in 1 usecs [ 6167.362669] [drm] UVD initialized successfully. [ 6167.362731] [drm] ib test on ring 0 succeeded in 0 usecs [ 6167.362788] [drm] ib test on ring 3 succeeded in 0 usecs [ 6167.419531] ata6: SATA link down (SStatus 0 SControl 300) [ 6167.419656] ata5: SATA link down (SStatus 0 SControl 300) [ 6167.419680] ata4: SATA link down (SStatus 0 SControl 300) [ 6167.508860] [drm] ib test on ring 5 succeeded [ 6167.581383] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6167.581730] ata3.00: configured for UDMA/133 [ 6167.673392] firewire_core 0000:03:05.0: rediscovered device fw0 [ 6167.698621] OOM killer enabled. [ 6167.698623] Restarting tasks ... done. [ 6167.730374] PM: suspend exit [ 6167.969314] rfkill: input handler disabled [ 6167.974822] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [ 6168.220525] r8169 0000:05:00.0 enp5s0: Link is Down [ 6170.559516] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 6170.559558] wlp4s0: 80 MHz not supported, disabling VHT [ 6170.569501] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6170.580086] wlp4s0: authenticated [ 6170.581378] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6170.635785] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=3) [ 6170.635906] wlp4s0: associated [ 6170.725502] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 6471.874184] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [ 9647.502331] ath: phy0: Unable to reset channel, reset status -5 [11572.136929] ath: phy0: Unable to reset channel, reset status -5 [16589.961657] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [16590.173918] PM: suspend entry (deep) [16590.181729] Filesystems sync: 0.007 seconds [16590.240515] rfkill: input handler enabled [16590.372344] Freezing user space processes ... (elapsed 0.003 seconds) done. [16590.375998] OOM killer disabled. [16590.375999] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [16590.377418] printk: Suspending console(s) (use no_console_suspend to debug) [16590.378268] serial 00:08: disabled [16590.417494] sd 2:0:0:0: [sda] Synchronizing SCSI cache [16590.417660] sd 2:0:0:0: [sda] Stopping disk [16593.889421] ACPI: PM: Preparing to enter system sleep state S3 [16594.514160] ACPI: PM: Saving platform NVS memory [16594.514360] Disabling non-boot CPUs ... [16594.516951] smpboot: CPU 1 is now offline [16594.518949] smpboot: CPU 2 is now offline [16594.521210] smpboot: CPU 3 is now offline [16594.523253] smpboot: CPU 4 is now offline [16594.525384] smpboot: CPU 5 is now offline [16594.525409] ACPI: PM: Low-level resume complete [16594.525409] ACPI: PM: Restoring platform NVS memory [16594.525409] PCI-DMA: Resuming GART IOMMU [16594.525409] PCI-DMA: Restoring GART aperture settings [16594.525409] LVT offset 0 assigned for vector 0x400 [16594.525409] microcode: reload patch_level=0x06000852 [16594.531808] Enabling non-boot CPUs ... [16594.531862] x86: Booting SMP configuration: [16594.531863] smpboot: Booting Node 0 Processor 1 APIC 0x11 [16594.516095] microcode: CPU1: patch_level=0x06000852 [16594.532894] ACPI: \_PR_.P002: Found 2 idle states [16594.533311] CPU1 is up [16594.533477] smpboot: Booting Node 0 Processor 2 APIC 0x12 [16594.532831] microcode: CPU2: patch_level=0x06000852 [16594.540261] ACPI: \_PR_.P003: Found 2 idle states [16594.540698] CPU2 is up [16594.540728] smpboot: Booting Node 0 Processor 3 APIC 0x13 [16594.540112] microcode: CPU3: patch_level=0x06000852 [16594.541829] ACPI: \_PR_.P004: Found 2 idle states [16594.542319] CPU3 is up [16594.542358] smpboot: Booting Node 0 Processor 4 APIC 0x14 [16594.541681] microcode: CPU4: patch_level=0x06000852 [16594.549175] ACPI: \_PR_.P005: Found 2 idle states [16594.549755] CPU4 is up [16594.549797] smpboot: Booting Node 0 Processor 5 APIC 0x15 [16594.549048] microcode: CPU5: patch_level=0x06000852 [16594.550918] ACPI: \_PR_.P006: Found 2 idle states [16594.551578] CPU5 is up [16594.560432] ACPI: PM: Waking up from system sleep state S3 [16594.623127] sd 2:0:0:0: [sda] Starting disk [16594.624788] serial 00:08: activated [16594.676733] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [16594.689043] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [16594.689134] radeon 0000:01:00.0: WB enabled [16594.689136] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [16594.689139] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [16594.692019] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [16594.692169] debugfs: File 'radeon_ring_gfx' in directory '0' already present! [16594.692172] debugfs: File 'radeon_ring_dma1' in directory '0' already present! [16594.707792] [drm] ring test on 0 succeeded in 1 usecs [16594.707798] [drm] ring test on 3 succeeded in 3 usecs [16594.707800] debugfs: File 'radeon_ring_uvd' in directory '0' already present! [16594.878854] [drm] ring test on 5 succeeded in 1 usecs [16594.878860] [drm] UVD initialized successfully. [16594.878912] [drm] ib test on ring 0 succeeded in 0 usecs [16594.878971] [drm] ib test on ring 3 succeeded in 0 usecs [16594.935630] ata5: SATA link down (SStatus 0 SControl 300) [16594.939271] ata6: SATA link down (SStatus 0 SControl 300) [16594.939476] ata4: SATA link down (SStatus 0 SControl 300) [16595.025036] [drm] ib test on ring 5 succeeded [16595.101373] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [16595.101731] ata3.00: configured for UDMA/133 [16595.193474] firewire_core 0000:03:05.0: rediscovered device fw0 [16595.214825] OOM killer enabled. [16595.214828] Restarting tasks ... done. [16595.234674] PM: suspend exit [16595.469744] rfkill: input handler disabled [16595.470860] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [16595.687640] r8169 0000:05:00.0 enp5s0: Link is Down [16597.986415] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [16597.986438] wlp4s0: 80 MHz not supported, disabling VHT [16597.996259] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16598.012049] wlp4s0: authenticated [16598.013377] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16598.068367] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=3) [16598.068484] wlp4s0: associated [16598.117593] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [16748.111695] ath: phy0: Unable to reset channel, reset status -5 [16899.660971] ath: phy0: Unable to reset channel, reset status -5 [16899.775308] ath: phy0: Unable to reset channel, reset status -5 [17200.609785] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 1 (2462.000/0 MHz) [20253.031408] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [20253.209876] PM: suspend entry (deep) [20253.219122] Filesystems sync: 0.009 seconds [20253.274420] rfkill: input handler enabled [20253.289811] Freezing user space processes ... (elapsed 0.003 seconds) done. [20253.293308] OOM killer disabled. [20253.293309] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [20253.294688] printk: Suspending console(s) (use no_console_suspend to debug) [20253.295626] serial 00:08: disabled [20253.325394] sd 2:0:0:0: [sda] Synchronizing SCSI cache [20253.325563] sd 2:0:0:0: [sda] Stopping disk [20256.253404] ACPI: PM: Preparing to enter system sleep state S3 [20256.877722] ACPI: PM: Saving platform NVS memory [20256.877844] Disabling non-boot CPUs ... [20256.880407] smpboot: CPU 1 is now offline [20256.882622] smpboot: CPU 2 is now offline [20256.884929] smpboot: CPU 3 is now offline [20256.887739] smpboot: CPU 4 is now offline [20256.889575] smpboot: CPU 5 is now offline [20256.889612] ACPI: PM: Low-level resume complete [20256.889612] ACPI: PM: Restoring platform NVS memory [20256.889612] PCI-DMA: Resuming GART IOMMU [20256.889612] PCI-DMA: Restoring GART aperture settings [20256.889612] LVT offset 0 assigned for vector 0x400 [20256.889612] microcode: reload patch_level=0x06000852 [20256.896022] Enabling non-boot CPUs ... [20256.896076] x86: Booting SMP configuration: [20256.896077] smpboot: Booting Node 0 Processor 1 APIC 0x11 [20256.879548] microcode: CPU1: patch_level=0x06000852 [20256.897113] ACPI: \_PR_.P002: Found 2 idle states [20256.897568] CPU1 is up [20256.897705] smpboot: Booting Node 0 Processor 2 APIC 0x12 [20256.896980] microcode: CPU2: patch_level=0x06000852 [20256.904630] ACPI: \_PR_.P003: Found 2 idle states [20256.905066] CPU2 is up [20256.905095] smpboot: Booting Node 0 Processor 3 APIC 0x13 [20256.904495] microcode: CPU3: patch_level=0x06000852 [20256.906203] ACPI: \_PR_.P004: Found 2 idle states [20256.906686] CPU3 is up [20256.906725] smpboot: Booting Node 0 Processor 4 APIC 0x14 [20256.906056] microcode: CPU4: patch_level=0x06000852 [20256.913654] ACPI: \_PR_.P005: Found 2 idle states [20256.914213] CPU4 is up [20256.914249] smpboot: Booting Node 0 Processor 5 APIC 0x15 [20256.913501] microcode: CPU5: patch_level=0x06000852 [20256.915365] ACPI: \_PR_.P006: Found 2 idle states [20256.916030] CPU5 is up [20256.924893] ACPI: PM: Waking up from system sleep state S3 [20256.987024] sd 2:0:0:0: [sda] Starting disk [20256.988316] serial 00:08: activated [20257.040515] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [20257.052816] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [20257.052907] radeon 0000:01:00.0: WB enabled [20257.052909] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [20257.052912] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [20257.055792] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [20257.055938] debugfs: File 'radeon_ring_gfx' in directory '0' already present! [20257.055941] debugfs: File 'radeon_ring_dma1' in directory '0' already present! [20257.071560] [drm] ring test on 0 succeeded in 1 usecs [20257.071566] [drm] ring test on 3 succeeded in 3 usecs [20257.071568] debugfs: File 'radeon_ring_uvd' in directory '0' already present! [20257.242599] [drm] ring test on 5 succeeded in 1 usecs [20257.242605] [drm] UVD initialized successfully. [20257.242653] [drm] ib test on ring 0 succeeded in 0 usecs [20257.242719] [drm] ib test on ring 3 succeeded in 0 usecs [20257.299253] ata6: SATA link down (SStatus 0 SControl 300) [20257.299586] ata5: SATA link down (SStatus 0 SControl 300) [20257.299628] ata4: SATA link down (SStatus 0 SControl 300) [20257.388781] [drm] ib test on ring 5 succeeded [20257.461362] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [20257.461695] ata3.00: configured for UDMA/133 [20257.561527] firewire_core 0000:03:05.0: rediscovered device fw0 [20257.578432] OOM killer enabled. [20257.578434] Restarting tasks ... done. [20257.591901] PM: suspend exit [20257.819780] rfkill: input handler disabled [20257.820310] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [20258.087944] r8169 0000:05:00.0 enp5s0: Link is Down [20260.418672] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [20260.418695] wlp4s0: 80 MHz not supported, disabling VHT [20260.428497] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [20260.444647] wlp4s0: authenticated [20260.449348] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [20260.500379] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [20260.500438] wlp4s0: associated [20260.589498] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [20561.682906] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [21230.045402] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [21230.245903] PM: suspend entry (deep) [21230.253740] Filesystems sync: 0.007 seconds [21230.382186] rfkill: input handler enabled [21230.397182] Freezing user space processes ... (elapsed 0.005 seconds) done. [21230.402678] OOM killer disabled. [21230.402681] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [21230.404448] printk: Suspending console(s) (use no_console_suspend to debug) [21230.406389] serial 00:08: disabled [21230.441420] sd 2:0:0:0: [sda] Synchronizing SCSI cache [21230.441615] sd 2:0:0:0: [sda] Stopping disk [21232.445476] ACPI: PM: Preparing to enter system sleep state S3 [21233.069740] ACPI: PM: Saving platform NVS memory [21233.069861] Disabling non-boot CPUs ... [21233.074358] smpboot: CPU 1 is now offline [21233.077239] smpboot: CPU 2 is now offline [21233.079368] smpboot: CPU 3 is now offline [21233.084136] smpboot: CPU 4 is now offline [21233.086484] smpboot: CPU 5 is now offline [21233.086534] ACPI: PM: Low-level resume complete [21233.086534] ACPI: PM: Restoring platform NVS memory [21233.086534] PCI-DMA: Resuming GART IOMMU [21233.086534] PCI-DMA: Restoring GART aperture settings [21233.086534] LVT offset 0 assigned for vector 0x400 [21233.086534] microcode: reload patch_level=0x06000852 [21233.093612] Enabling non-boot CPUs ... [21233.093664] x86: Booting SMP configuration: [21233.093665] smpboot: Booting Node 0 Processor 1 APIC 0x11 [21233.072294] microcode: CPU1: patch_level=0x06000852 [21233.094690] ACPI: \_PR_.P002: Found 2 idle states [21233.095104] CPU1 is up [21233.095154] smpboot: Booting Node 0 Processor 2 APIC 0x12 [21233.094553] microcode: CPU2: patch_level=0x06000852 [21233.101974] ACPI: \_PR_.P003: Found 2 idle states [21233.102419] CPU2 is up [21233.102448] smpboot: Booting Node 0 Processor 3 APIC 0x13 [21233.101910] microcode: CPU3: patch_level=0x06000852 [21233.103544] ACPI: \_PR_.P004: Found 2 idle states [21233.104039] CPU3 is up [21233.104072] smpboot: Booting Node 0 Processor 4 APIC 0x14 [21233.103391] microcode: CPU4: patch_level=0x06000852 [21233.110997] ACPI: \_PR_.P005: Found 2 idle states [21233.111569] CPU4 is up [21233.111599] smpboot: Booting Node 0 Processor 5 APIC 0x15 [21233.110846] microcode: CPU5: patch_level=0x06000852 [21233.112699] ACPI: \_PR_.P006: Found 2 idle states [21233.113399] CPU5 is up [21233.122337] ACPI: PM: Waking up from system sleep state S3 [21233.183112] sd 2:0:0:0: [sda] Starting disk [21233.184403] serial 00:08: activated [21233.236529] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [21233.248828] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [21233.248918] radeon 0000:01:00.0: WB enabled [21233.248921] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [21233.248923] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [21233.251807] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [21233.251957] debugfs: File 'radeon_ring_gfx' in directory '0' already present! [21233.251960] debugfs: File 'radeon_ring_dma1' in directory '0' already present! [21233.267579] [drm] ring test on 0 succeeded in 1 usecs [21233.267586] [drm] ring test on 3 succeeded in 3 usecs [21233.267587] debugfs: File 'radeon_ring_uvd' in directory '0' already present! [21233.438621] [drm] ring test on 5 succeeded in 1 usecs [21233.438627] [drm] UVD initialized successfully. [21233.438688] [drm] ib test on ring 0 succeeded in 0 usecs [21233.438745] [drm] ib test on ring 3 succeeded in 0 usecs [21233.499257] ata6: SATA link down (SStatus 0 SControl 300) [21233.499673] ata5: SATA link down (SStatus 0 SControl 300) [21233.499723] ata4: SATA link down (SStatus 0 SControl 300) [21233.584804] [drm] ib test on ring 5 succeeded [21233.661365] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [21233.661765] ata3.00: configured for UDMA/133 [21233.753404] firewire_core 0000:03:05.0: rediscovered device fw0 [21233.774825] OOM killer enabled. [21233.774827] Restarting tasks ... done. [21233.785286] PM: suspend exit [21234.013859] rfkill: input handler disabled [21234.017329] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [21234.279440] r8169 0000:05:00.0 enp5s0: Link is Down [21236.622041] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [21236.622063] wlp4s0: 80 MHz not supported, disabling VHT [21236.631875] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [21236.642372] wlp4s0: authenticated [21236.649358] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [21236.698809] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [21236.698916] wlp4s0: associated [21236.757597] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [21265.853100] ath: phy0: Unable to reset channel, reset status -5 [21274.856772] ath: phy0: Unable to reset channel, reset status -5 [21274.970731] ath: phy0: Unable to reset channel, reset status -5 [21539.241638] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 1 (2462.000/0 MHz) [22139.206188] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [22739.273467] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 1 (2462.000/0 MHz) [23345.568505] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [23345.752569] PM: suspend entry (deep) [23345.761174] Filesystems sync: 0.008 seconds [23345.810124] rfkill: input handler enabled [23345.831431] Freezing user space processes ... (elapsed 0.003 seconds) done. [23345.834976] OOM killer disabled. [23345.834977] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [23345.836351] printk: Suspending console(s) (use no_console_suspend to debug) [23345.837208] serial 00:08: disabled [23345.865409] sd 2:0:0:0: [sda] Synchronizing SCSI cache [23345.865579] sd 2:0:0:0: [sda] Stopping disk [23348.693410] ACPI: PM: Preparing to enter system sleep state S3 [23349.317723] ACPI: PM: Saving platform NVS memory [23349.317847] Disabling non-boot CPUs ... [23349.320376] smpboot: CPU 1 is now offline [23349.323247] smpboot: CPU 2 is now offline [23349.325276] smpboot: CPU 3 is now offline [23349.327347] smpboot: CPU 4 is now offline [23349.329457] smpboot: CPU 5 is now offline [23349.329483] ACPI: PM: Low-level resume complete [23349.329483] ACPI: PM: Restoring platform NVS memory [23349.329483] PCI-DMA: Resuming GART IOMMU [23349.329483] PCI-DMA: Restoring GART aperture settings [23349.329483] LVT offset 0 assigned for vector 0x400 [23349.329483] microcode: reload patch_level=0x06000852 [23349.335872] Enabling non-boot CPUs ... [23349.335927] x86: Booting SMP configuration: [23349.335928] smpboot: Booting Node 0 Processor 1 APIC 0x11 [23349.319546] microcode: CPU1: patch_level=0x06000852 [23349.336970] ACPI: \_PR_.P002: Found 2 idle states [23349.337411] CPU1 is up [23349.337549] smpboot: Booting Node 0 Processor 2 APIC 0x12 [23349.336836] microcode: CPU2: patch_level=0x06000852 [23349.344481] ACPI: \_PR_.P003: Found 2 idle states [23349.344908] CPU2 is up [23349.344944] smpboot: Booting Node 0 Processor 3 APIC 0x13 [23349.344417] microcode: CPU3: patch_level=0x06000852 [23349.346043] ACPI: \_PR_.P004: Found 2 idle states [23349.346532] CPU3 is up [23349.346565] smpboot: Booting Node 0 Processor 4 APIC 0x14 [23349.345895] microcode: CPU4: patch_level=0x06000852 [23349.353509] ACPI: \_PR_.P005: Found 2 idle states [23349.354101] CPU4 is up [23349.354129] smpboot: Booting Node 0 Processor 5 APIC 0x15 [23349.353356] microcode: CPU5: patch_level=0x06000852 [23349.355246] ACPI: \_PR_.P006: Found 2 idle states [23349.355920] CPU5 is up [23349.364747] ACPI: PM: Waking up from system sleep state S3 [23349.431116] sd 2:0:0:0: [sda] Starting disk [23349.432586] serial 00:08: activated [23349.484630] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [23349.496939] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [23349.497030] radeon 0000:01:00.0: WB enabled [23349.497032] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [23349.497035] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [23349.499916] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [23349.500062] debugfs: File 'radeon_ring_gfx' in directory '0' already present! [23349.500065] debugfs: File 'radeon_ring_dma1' in directory '0' already present! [23349.515683] [drm] ring test on 0 succeeded in 1 usecs [23349.515689] [drm] ring test on 3 succeeded in 2 usecs [23349.515690] debugfs: File 'radeon_ring_uvd' in directory '0' already present! [23349.686729] [drm] ring test on 5 succeeded in 1 usecs [23349.686735] [drm] UVD initialized successfully. [23349.686787] [drm] ib test on ring 0 succeeded in 0 usecs [23349.686850] [drm] ib test on ring 3 succeeded in 0 usecs [23349.743633] ata5: SATA link down (SStatus 0 SControl 300) [23349.743662] ata6: SATA link down (SStatus 0 SControl 300) [23349.747595] ata4: SATA link down (SStatus 0 SControl 300) [23349.832915] [drm] ib test on ring 5 succeeded [23349.909375] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [23349.909731] ata3.00: configured for UDMA/133 [23350.009463] firewire_core 0000:03:05.0: rediscovered device fw0 [23350.022529] OOM killer enabled. [23350.022531] Restarting tasks ... done. [23350.045218] PM: suspend exit [23350.315388] rfkill: input handler disabled [23350.322204] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [23350.595485] r8169 0000:05:00.0 enp5s0: Link is Down [23352.909685] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [23352.909721] wlp4s0: 80 MHz not supported, disabling VHT [23352.919624] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [23352.930212] wlp4s0: authenticated [23352.933412] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [23352.986014] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [23352.986340] wlp4s0: associated [23353.025574] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [23654.189659] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [24707.618369] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [24707.826021] PM: suspend entry (deep) [24707.834714] Filesystems sync: 0.008 seconds [24707.881139] rfkill: input handler enabled [24707.903613] Freezing user space processes ... (elapsed 0.003 seconds) done. [24707.907125] OOM killer disabled. [24707.907126] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [24707.908493] printk: Suspending console(s) (use no_console_suspend to debug) [24707.909400] serial 00:08: disabled [24707.933414] sd 2:0:0:0: [sda] Synchronizing SCSI cache [24707.933578] sd 2:0:0:0: [sda] Stopping disk [24710.725430] ACPI: PM: Preparing to enter system sleep state S3 [24711.349759] ACPI: PM: Saving platform NVS memory [24711.349881] Disabling non-boot CPUs ... [24711.352426] smpboot: CPU 1 is now offline [24711.354692] smpboot: CPU 2 is now offline [24711.356990] smpboot: CPU 3 is now offline [24711.359671] smpboot: CPU 4 is now offline [24711.361699] smpboot: CPU 5 is now offline [24711.361750] ACPI: PM: Low-level resume complete [24711.361750] ACPI: PM: Restoring platform NVS memory [24711.361750] PCI-DMA: Resuming GART IOMMU [24711.361750] PCI-DMA: Restoring GART aperture settings [24711.361750] LVT offset 0 assigned for vector 0x400 [24711.361750] microcode: reload patch_level=0x06000852 [24711.368382] Enabling non-boot CPUs ... [24711.368435] x86: Booting SMP configuration: [24711.368436] smpboot: Booting Node 0 Processor 1 APIC 0x11 [24711.351597] microcode: CPU1: patch_level=0x06000852 [24711.369509] ACPI: \_PR_.P002: Found 2 idle states [24711.369957] CPU1 is up [24711.370054] smpboot: Booting Node 0 Processor 2 APIC 0x12 [24711.369346] microcode: CPU2: patch_level=0x06000852 [24711.376839] ACPI: \_PR_.P003: Found 2 idle states [24711.377267] CPU2 is up [24711.377304] smpboot: Booting Node 0 Processor 3 APIC 0x13 [24711.376703] microcode: CPU3: patch_level=0x06000852 [24711.378407] ACPI: \_PR_.P004: Found 2 idle states [24711.378896] CPU3 is up [24711.378935] smpboot: Booting Node 0 Processor 4 APIC 0x14 [24711.378333] microcode: CPU4: patch_level=0x06000852 [24711.385864] ACPI: \_PR_.P005: Found 2 idle states [24711.386436] CPU4 is up [24711.386472] smpboot: Booting Node 0 Processor 5 APIC 0x15 [24711.385705] microcode: CPU5: patch_level=0x06000852 [24711.387581] ACPI: \_PR_.P006: Found 2 idle states [24711.388241] CPU5 is up [24711.397082] ACPI: PM: Waking up from system sleep state S3 [24711.459100] sd 2:0:0:0: [sda] Starting disk [24711.460586] serial 00:08: activated [24711.512563] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [24711.524869] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [24711.524960] radeon 0000:01:00.0: WB enabled [24711.524963] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [24711.524965] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [24711.527847] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [24711.527993] debugfs: File 'radeon_ring_gfx' in directory '0' already present! [24711.527996] debugfs: File 'radeon_ring_dma1' in directory '0' already present! [24711.543613] [drm] ring test on 0 succeeded in 1 usecs [24711.543620] [drm] ring test on 3 succeeded in 3 usecs [24711.543622] debugfs: File 'radeon_ring_uvd' in directory '0' already present! [24711.714659] [drm] ring test on 5 succeeded in 1 usecs [24711.714665] [drm] UVD initialized successfully. [24711.714713] [drm] ib test on ring 0 succeeded in 0 usecs [24711.714774] [drm] ib test on ring 3 succeeded in 0 usecs [24711.771232] ata5: SATA link down (SStatus 0 SControl 300) [24711.771281] ata6: SATA link down (SStatus 0 SControl 300) [24711.771526] ata4: SATA link down (SStatus 0 SControl 300) [24711.860839] [drm] ib test on ring 5 succeeded [24711.933374] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [24711.933782] ata3.00: configured for UDMA/133 [24712.025470] firewire_core 0000:03:05.0: rediscovered device fw0 [24712.050515] OOM killer enabled. [24712.050517] Restarting tasks ... done. [24712.070310] PM: suspend exit [24712.328382] rfkill: input handler disabled [24712.333386] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [24712.600651] r8169 0000:05:00.0 enp5s0: Link is Down [24714.905541] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [24714.905581] wlp4s0: 80 MHz not supported, disabling VHT [24714.915519] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [24714.933904] wlp4s0: authenticated [24714.937406] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [24714.990704] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [24714.990853] wlp4s0: associated [24715.049629] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [25017.456670] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 1 (2462.000/0 MHz) [25685.079976] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [25685.273345] PM: suspend entry (deep) [25685.282684] Filesystems sync: 0.009 seconds [25685.352800] rfkill: input handler enabled [25685.382156] Freezing user space processes ... (elapsed 0.003 seconds) done. [25685.385608] OOM killer disabled. [25685.385609] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [25685.386996] printk: Suspending console(s) (use no_console_suspend to debug) [25685.387886] serial 00:08: disabled [25685.421447] sd 2:0:0:0: [sda] Synchronizing SCSI cache [25685.421619] sd 2:0:0:0: [sda] Stopping disk [25687.301411] ACPI: PM: Preparing to enter system sleep state S3 [25687.925759] ACPI: PM: Saving platform NVS memory [25687.925887] Disabling non-boot CPUs ... [25687.928399] smpboot: CPU 1 is now offline [25687.930641] smpboot: CPU 2 is now offline [25687.932966] smpboot: CPU 3 is now offline [25687.935036] smpboot: CPU 4 is now offline [25687.937173] smpboot: CPU 5 is now offline [25687.937556] ACPI: PM: Low-level resume complete [25687.937556] ACPI: PM: Restoring platform NVS memory [25687.937556] PCI-DMA: Resuming GART IOMMU [25687.937556] PCI-DMA: Restoring GART aperture settings [25687.937556] LVT offset 0 assigned for vector 0x400 [25687.937556] microcode: reload patch_level=0x06000852 [25687.943875] Enabling non-boot CPUs ... [25687.943928] x86: Booting SMP configuration: [25687.943929] smpboot: Booting Node 0 Processor 1 APIC 0x11 [25687.933404] microcode: CPU1: patch_level=0x06000852 [25687.944966] ACPI: \_PR_.P002: Found 2 idle states [25687.945406] CPU1 is up [25687.945475] smpboot: Booting Node 0 Processor 2 APIC 0x12 [25687.944831] microcode: CPU2: patch_level=0x06000852 [25687.952261] ACPI: \_PR_.P003: Found 2 idle states [25687.952696] CPU2 is up [25687.952738] smpboot: Booting Node 0 Processor 3 APIC 0x13 [25687.952122] microcode: CPU3: patch_level=0x06000852 [25687.953832] ACPI: \_PR_.P004: Found 2 idle states [25687.954330] CPU3 is up [25687.954356] smpboot: Booting Node 0 Processor 4 APIC 0x14 [25687.953758] microcode: CPU4: patch_level=0x06000852 [25687.961287] ACPI: \_PR_.P005: Found 2 idle states [25687.961885] CPU4 is up [25687.961922] smpboot: Booting Node 0 Processor 5 APIC 0x15 [25687.961160] microcode: CPU5: patch_level=0x06000852 [25687.963034] ACPI: \_PR_.P006: Found 2 idle states [25687.963702] CPU5 is up [25687.972511] ACPI: PM: Waking up from system sleep state S3 [25688.039124] sd 2:0:0:0: [sda] Starting disk [25688.039692] serial 00:08: activated [25688.092598] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [25688.104898] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [25688.104989] radeon 0000:01:00.0: WB enabled [25688.104991] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [25688.104994] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [25688.107876] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [25688.108022] debugfs: File 'radeon_ring_gfx' in directory '0' already present! [25688.108025] debugfs: File 'radeon_ring_dma1' in directory '0' already present! [25688.123644] [drm] ring test on 0 succeeded in 1 usecs [25688.123651] [drm] ring test on 3 succeeded in 3 usecs [25688.123652] debugfs: File 'radeon_ring_uvd' in directory '0' already present! [25688.294694] [drm] ring test on 5 succeeded in 1 usecs [25688.294700] [drm] UVD initialized successfully. [25688.294748] [drm] ib test on ring 0 succeeded in 0 usecs [25688.294809] [drm] ib test on ring 3 succeeded in 0 usecs [25688.351425] ata4: SATA link down (SStatus 0 SControl 300) [25688.351638] ata5: SATA link down (SStatus 0 SControl 300) [25688.351662] ata6: SATA link down (SStatus 0 SControl 300) [25688.440876] [drm] ib test on ring 5 succeeded [25688.513380] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [25688.513693] ata3.00: configured for UDMA/133 [25688.601391] firewire_core 0000:03:05.0: rediscovered device fw0 [25688.630633] OOM killer enabled. [25688.630636] Restarting tasks ... done. [25688.640791] PM: suspend exit [25688.893024] rfkill: input handler disabled [25688.897233] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [25689.151412] r8169 0000:05:00.0 enp5s0: Link is Down [25691.474726] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [25691.474758] wlp4s0: 80 MHz not supported, disabling VHT [25691.486461] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [25691.496398] wlp4s0: authenticated [25691.497367] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [25691.553259] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [25691.553476] wlp4s0: associated [25691.621476] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [25992.778387] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [26661.045841] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [26661.258895] PM: suspend entry (deep) [26661.267082] Filesystems sync: 0.008 seconds [26661.330418] rfkill: input handler enabled [26661.359398] Freezing user space processes ... (elapsed 0.003 seconds) done. [26661.362935] OOM killer disabled. [26661.362936] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [26661.364315] printk: Suspending console(s) (use no_console_suspend to debug) [26661.365252] serial 00:08: disabled [26661.397377] sd 2:0:0:0: [sda] Synchronizing SCSI cache [26661.397604] sd 2:0:0:0: [sda] Stopping disk [26663.305396] ACPI: PM: Preparing to enter system sleep state S3 [26663.930184] ACPI: PM: Saving platform NVS memory [26663.930368] Disabling non-boot CPUs ... [26663.932956] smpboot: CPU 1 is now offline [26663.935184] smpboot: CPU 2 is now offline [26663.937484] smpboot: CPU 3 is now offline [26663.940521] smpboot: CPU 4 is now offline [26663.942329] smpboot: CPU 5 is now offline [26663.942372] ACPI: PM: Low-level resume complete [26663.942372] ACPI: PM: Restoring platform NVS memory [26663.942372] PCI-DMA: Resuming GART IOMMU [26663.942372] PCI-DMA: Restoring GART aperture settings [26663.942372] LVT offset 0 assigned for vector 0x400 [26663.942372] microcode: reload patch_level=0x06000852 [26663.949022] Enabling non-boot CPUs ... [26663.949074] x86: Booting SMP configuration: [26663.949075] smpboot: Booting Node 0 Processor 1 APIC 0x11 [26663.932114] microcode: CPU1: patch_level=0x06000852 [26663.950445] ACPI: \_PR_.P002: Found 2 idle states [26663.950856] CPU1 is up [26663.950897] smpboot: Booting Node 0 Processor 2 APIC 0x12 [26663.950300] microcode: CPU2: patch_level=0x06000852 [26663.957688] ACPI: \_PR_.P003: Found 2 idle states [26663.958126] CPU2 is up [26663.958161] smpboot: Booting Node 0 Processor 3 APIC 0x13 [26663.957539] microcode: CPU3: patch_level=0x06000852 [26663.959262] ACPI: \_PR_.P004: Found 2 idle states [26663.959750] CPU3 is up [26663.959783] smpboot: Booting Node 0 Processor 4 APIC 0x14 [26663.959112] microcode: CPU4: patch_level=0x06000852 [26663.966560] ACPI: \_PR_.P005: Found 2 idle states [26663.967150] CPU4 is up [26663.967181] smpboot: Booting Node 0 Processor 5 APIC 0x15 [26663.966409] microcode: CPU5: patch_level=0x06000852 [26663.968301] ACPI: \_PR_.P006: Found 2 idle states [26663.968993] CPU5 is up [26663.977825] ACPI: PM: Waking up from system sleep state S3 [26664.039222] sd 2:0:0:0: [sda] Starting disk [26664.040302] serial 00:08: activated [26664.092691] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [26664.104995] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [26664.105086] radeon 0000:01:00.0: WB enabled [26664.105089] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [26664.105091] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [26664.107971] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [26664.108120] debugfs: File 'radeon_ring_gfx' in directory '0' already present! [26664.108123] debugfs: File 'radeon_ring_dma1' in directory '0' already present! [26664.123737] [drm] ring test on 0 succeeded in 1 usecs [26664.123743] [drm] ring test on 3 succeeded in 3 usecs [26664.123745] debugfs: File 'radeon_ring_uvd' in directory '0' already present! [26664.294722] [drm] ring test on 5 succeeded in 1 usecs [26664.294728] [drm] UVD initialized successfully. [26664.294792] [drm] ib test on ring 0 succeeded in 0 usecs [26664.294854] [drm] ib test on ring 3 succeeded in 0 usecs [26664.351295] ata6: SATA link down (SStatus 0 SControl 300) [26664.351657] ata4: SATA link down (SStatus 0 SControl 300) [26664.355498] ata5: SATA link down (SStatus 0 SControl 300) [26664.440866] [drm] ib test on ring 5 succeeded [26664.517359] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [26664.517764] ata3.00: configured for UDMA/133 [26664.601362] firewire_core 0000:03:05.0: rediscovered device fw0 [26664.630593] OOM killer enabled. [26664.630595] Restarting tasks ... done. [26664.645341] PM: suspend exit [26664.905257] rfkill: input handler disabled [26664.909281] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [26665.151376] r8169 0000:05:00.0 enp5s0: Link is Down [26667.444662] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [26667.444689] wlp4s0: 80 MHz not supported, disabling VHT [26667.454519] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [26667.465064] wlp4s0: authenticated [26667.469369] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [26667.530569] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [26667.530726] wlp4s0: associated [26667.609515] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [26681.685378] usb 8-4: new high-speed USB device number 5 using xhci_hcd [26681.869832] usb 8-4: New USB device found, idVendor=0bda, idProduct=0165, bcdDevice=61.23 [26681.869845] usb 8-4: New USB device strings: Mfr=1, Product=6, SerialNumber=... [26681.869851] usb 8-4: Product: Smart Card Reader Interface [26681.869855] usb 8-4: Manufacturer: Generic [26681.869859] usb 8-4: SerialNumber: ... [26786.893490] usb 8-4: USB disconnect, device number 5 [26796.845403] usb 8-4: new high-speed USB device number 6 using xhci_hcd [26797.029898] usb 8-4: New USB device found, idVendor=0bda, idProduct=0165, bcdDevice=61.23 [26797.029909] usb 8-4: New USB device strings: Mfr=1, Product=6, SerialNumber=... [26797.029915] usb 8-4: Product: Smart Card Reader Interface [26797.029919] usb 8-4: Manufacturer: Generic [26797.029923] usb 8-4: SerialNumber: ... [26909.347094] Non-volatile memory driver v1.3 [26909.530790] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [26911.294229] r8169 0000:05:00.0: invalid VPD tag 0xff (size 0) at offset 0; assume missing optional EEPROM [29073.447565] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [29073.654921] PM: suspend entry (deep) [29073.664206] Filesystems sync: 0.009 seconds [29073.696507] rfkill: input handler enabled [29073.716320] Freezing user space processes ... (elapsed 0.003 seconds) done. [29073.720163] OOM killer disabled. [29073.720164] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [29073.721569] printk: Suspending console(s) (use no_console_suspend to debug) [29073.722466] serial 00:08: disabled [29073.761461] sd 2:0:0:0: [sda] Synchronizing SCSI cache [29073.761628] sd 2:0:0:0: [sda] Stopping disk [29077.181380] ACPI: PM: Preparing to enter system sleep state S3 [29077.805726] ACPI: PM: Saving platform NVS memory [29077.805852] Disabling non-boot CPUs ... [29077.808406] smpboot: CPU 1 is now offline [29077.810585] smpboot: CPU 2 is now offline [29077.812901] smpboot: CPU 3 is now offline [29077.815504] smpboot: CPU 4 is now offline [29077.817334] smpboot: CPU 5 is now offline [29077.817358] ACPI: PM: Low-level resume complete [29077.817358] ACPI: PM: Restoring platform NVS memory [29077.817358] PCI-DMA: Resuming GART IOMMU [29077.817358] PCI-DMA: Restoring GART aperture settings [29077.817358] LVT offset 0 assigned for vector 0x400 [29077.817358] microcode: reload patch_level=0x06000852 [29077.823948] Enabling non-boot CPUs ... [29077.824002] x86: Booting SMP configuration: [29077.824003] smpboot: Booting Node 0 Processor 1 APIC 0x11 [29077.807567] microcode: CPU1: patch_level=0x06000852 [29077.825049] ACPI: \_PR_.P002: Found 2 idle states [29077.825505] CPU1 is up [29077.825653] smpboot: Booting Node 0 Processor 2 APIC 0x12 [29077.824911] microcode: CPU2: patch_level=0x06000852 [29077.832431] ACPI: \_PR_.P003: Found 2 idle states [29077.832875] CPU2 is up [29077.832906] smpboot: Booting Node 0 Processor 3 APIC 0x13 [29077.832286] microcode: CPU3: patch_level=0x06000852 [29077.834005] ACPI: \_PR_.P004: Found 2 idle states [29077.834521] CPU3 is up [29077.834554] smpboot: Booting Node 0 Processor 4 APIC 0x14 [29077.833858] microcode: CPU4: patch_level=0x06000852 [29077.841396] ACPI: \_PR_.P005: Found 2 idle states [29077.841980] CPU4 is up [29077.842016] smpboot: Booting Node 0 Processor 5 APIC 0x15 [29077.841298] microcode: CPU5: patch_level=0x06000852 [29077.843135] ACPI: \_PR_.P006: Found 2 idle states [29077.843815] CPU5 is up [29077.852641] ACPI: PM: Waking up from system sleep state S3 [29077.915070] sd 2:0:0:0: [sda] Starting disk [29077.916204] serial 00:08: activated [29077.968646] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [29077.980946] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [29077.981037] radeon 0000:01:00.0: WB enabled [29077.981040] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [29077.981042] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [29077.983925] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [29077.984070] debugfs: File 'radeon_ring_gfx' in directory '0' already present! [29077.984073] debugfs: File 'radeon_ring_dma1' in directory '0' already present! [29077.999694] [drm] ring test on 0 succeeded in 1 usecs [29077.999701] [drm] ring test on 3 succeeded in 3 usecs [29077.999702] debugfs: File 'radeon_ring_uvd' in directory '0' already present! [29078.170782] [drm] ring test on 5 succeeded in 1 usecs [29078.170788] [drm] UVD initialized successfully. [29078.170836] [drm] ib test on ring 0 succeeded in 0 usecs [29078.170896] [drm] ib test on ring 3 succeeded in 0 usecs [29078.227408] ata6: SATA link down (SStatus 0 SControl 300) [29078.227593] ata4: SATA link down (SStatus 0 SControl 300) [29078.227664] ata5: SATA link down (SStatus 0 SControl 300) [29078.316986] [drm] ib test on ring 5 succeeded [29078.389435] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [29078.389774] ata3.00: configured for UDMA/133 [29078.489498] firewire_core 0000:03:05.0: rediscovered device fw0 [29078.519931] OOM killer enabled. [29078.519933] Restarting tasks ... done. [29078.546034] PM: suspend exit [29078.796176] rfkill: input handler disabled [29078.798061] RTL8211E Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [29079.059439] r8169 0000:05:00.0 enp5s0: Link is Down [29081.372371] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [29081.372412] wlp4s0: 80 MHz not supported, disabling VHT [29081.382369] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29081.392233] wlp4s0: authenticated [29081.393361] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29081.448621] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [29081.448762] wlp4s0: associated [29081.509529] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [29526.813766] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [29827.049030] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 1 (2462.000/0 MHz) [29982.694613] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [29982.810167] ath: phy0: Unable to reset channel, reset status -5 [30884.089853] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 1 (2462.000/0 MHz) [32983.161543] usb 8-4: USB disconnect, device number 6 [32985.049382] usb 8-4: new high-speed USB device number 7 using xhci_hcd [32985.233924] usb 8-4: New USB device found, idVendor=0bda, idProduct=0165, bcdDevice=61.23 [32985.233938] usb 8-4: New USB device strings: Mfr=1, Product=6, SerialNumber=... [32985.233943] usb 8-4: Product: Smart Card Reader Interface [32985.233948] usb 8-4: Manufacturer: Generic [32985.233951] usb 8-4: SerialNumber: ... [33089.477417] usb 8-4: USB disconnect, device number 7 [33091.657360] usb 8-4: new high-speed USB device number 8 using xhci_hcd [33091.841653] usb 8-4: New USB device found, idVendor=0bda, idProduct=0165, bcdDevice=61.23 [33091.841661] usb 8-4: New USB device strings: Mfr=1, Product=6, SerialNumber=... [33091.841664] usb 8-4: Product: Smart Card Reader Interface [33091.841667] usb 8-4: Manufacturer: Generic [33091.841669] usb 8-4: SerialNumber: ... [34484.315857] wlp4s0: AP XX:XX:XX:XX:XX:XX changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz)