/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.14.21-150500.55.7-default] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WD Blue SN570 1TB SSD Serial Number: -- Firmware Version: 234110WD PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Sat Jul 29 14:20:11 2023 CEST Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 80 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 4.20W 3.70W - 0 0 0 0 0 0 1 + 2.70W 2.30W - 0 0 0 0 0 0 2 + 1.90W 1.80W - 0 0 0 0 0 0 3 - 0.0250W - - 3 3 3 3 3900 11000 4 - 0.0050W - - 4 4 4 4 5000 44000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 26 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 5,132,721 [2.62 TB] Data Units Written: 6,548,349 [3.35 TB] Host Read Commands: 31,500,651 Host Write Commands: 69,677,610 Controller Busy Time: 136 Power Cycles: 154 Power On Hours: 2,169 Unsafe Shutdowns: 113 Media and Data Integrity Errors: 0 Error Information Log Entries: 1 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.14.21-150500.55.7-default] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.B Device Model: Hitachi HDT721010SLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: ST6OA31B User Capacity: 1,000,203,804,160 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Jul 29 14:20:11 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14090) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 235) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 65536 2 Throughput_Performance P-S--- 132 132 054 - 115 3 Spin_Up_Time POS--- 120 120 024 - 476 (Average 475) 4 Start_Stop_Count -O--C- 100 100 000 - 642 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 1 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 125 125 020 - 33 9 Power_On_Hours -O--C- 100 100 000 - 4111 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 624 192 Power-Off_Retract_Count -O--CK 100 100 000 - 653 193 Load_Cycle_Count -O--C- 100 100 000 - 653 194 Temperature_Celsius -O---- 206 206 000 - 29 (Min/Max 9/59) 196 Reallocated_Event_Count -O--CK 100 100 000 - 1 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 894 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 35 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 35 [3] occurred at disk power-on lifetime: 3808 hours (158 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 3a 75 9f e8 4a 00 Error: ICRC, ABRT at LBA = 0x3a759fe8 = 980787176 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 70 00 00 3a 75 9f e1 40 00 00:03:10.100 WRITE FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 00 00 00:03:10.100 SET FEATURES [Enable write cache] 61 00 08 00 01 00 00 00 00 00 01 a0 ff 00:03:09.900 WRITE FPDMA QUEUED 61 00 08 00 00 00 00 3a 75 9f e8 4a ff 00:03:09.900 WRITE FPDMA QUEUED 61 00 08 00 68 00 00 3a 75 9f e1 40 00 00:03:09.900 WRITE FPDMA QUEUED Error 34 [2] occurred at disk power-on lifetime: 3808 hours (158 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 3a 75 9f e8 4a 00 Error: ICRC, ABRT at LBA = 0x3a759fe8 = 980787176 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 68 00 00 3a 75 9f e1 40 00 00:03:09.900 WRITE FPDMA QUEUED 61 00 08 00 60 00 00 3a 75 9f d9 40 00 00:03:09.900 WRITE FPDMA QUEUED 61 00 08 00 58 00 00 3a 75 9f d1 40 00 00:03:09.900 WRITE FPDMA QUEUED 61 00 01 00 50 00 00 3a 75 9f d0 40 00 00:03:09.900 WRITE FPDMA QUEUED 61 00 08 00 48 00 00 00 5e 3f 20 40 00 00:03:09.900 WRITE FPDMA QUEUED Error 33 [1] occurred at disk power-on lifetime: 3808 hours (158 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 01 00 00 Error: ICRC, ABRT at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 40 00 01 00 00 00 00 00 01 a0 ff 00:03:03.100 WRITE FPDMA QUEUED 61 00 40 00 00 00 00 5e 1b a3 88 4e ff 00:03:03.100 WRITE FPDMA QUEUED 61 00 40 00 80 00 00 5e 1b a3 48 40 00 00:03:03.100 WRITE FPDMA QUEUED 61 00 08 00 08 00 00 00 00 f2 a8 40 00 00:03:03.100 WRITE FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 00 00 00:03:03.100 SET FEATURES [Enable write cache] Error 32 [0] occurred at disk power-on lifetime: 3808 hours (158 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 5e 1b a3 87 4e 00 Error: ICRC, ABRT at LBA = 0x5e1ba387 = 1578869639 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 40 00 78 00 00 5e 1b a3 48 40 00 00:03:02.800 WRITE FPDMA QUEUED 61 00 08 00 70 00 00 00 63 28 38 40 00 00:03:02.800 WRITE FPDMA QUEUED 61 00 08 00 68 00 00 00 63 28 08 40 00 00:03:02.800 WRITE FPDMA QUEUED 61 00 08 00 60 00 00 64 ef d2 30 40 00 00:03:02.800 WRITE FPDMA QUEUED 61 00 08 00 58 00 00 64 ef cb 08 40 00 00:03:02.800 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4110 - # 2 Short offline Completed without error 00% 4093 - # 3 Short offline Completed without error 00% 4091 - # 4 Short offline Completed without error 00% 4088 - # 5 Short offline Completed without error 00% 4078 - # 6 Short offline Completed without error 00% 4076 - # 7 Short offline Completed without error 00% 4060 - # 8 Short offline Completed without error 00% 4058 - # 9 Short offline Completed without error 00% 4055 - #10 Short offline Completed without error 00% 4053 - #11 Short offline Completed without error 00% 4036 - #12 Short offline Completed without error 00% 4014 - #13 Short offline Completed without error 00% 3990 - #14 Short offline Completed without error 00% 3966 - #15 Short offline Completed without error 00% 3944 - #16 Short offline Completed without error 00% 3920 - #17 Short offline Completed without error 00% 3903 - #18 Short offline Completed without error 00% 3883 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 25/32 Celsius Lifetime Min/Max Temperature: 9/59 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (16) Index Estimated Time Temperature Celsius 17 2023-07-29 12:13 30 *********** 18 2023-07-29 12:14 31 ************ ... ..( 60 skipped). .. ************ 79 2023-07-29 13:15 31 ************ 80 2023-07-29 13:16 32 ************* 81 2023-07-29 13:17 31 ************ 82 2023-07-29 13:18 31 ************ 83 2023-07-29 13:19 32 ************* ... ..( 2 skipped). .. ************* 86 2023-07-29 13:22 32 ************* 87 2023-07-29 13:23 31 ************ ... ..( 7 skipped). .. ************ 95 2023-07-29 13:31 31 ************ 96 2023-07-29 13:32 30 *********** 97 2023-07-29 13:33 31 ************ 98 2023-07-29 13:34 30 *********** ... ..( 5 skipped). .. *********** 104 2023-07-29 13:40 30 *********** 105 2023-07-29 13:41 29 ********** 106 2023-07-29 13:42 30 *********** 107 2023-07-29 13:43 29 ********** ... ..( 36 skipped). .. ********** 16 2023-07-29 14:20 29 ********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.14.21-150500.55.7-default] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 QVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVQ02B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Jul 29 14:20:12 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 351 12 Power_Cycle_Count -O--CK 099 099 000 - 84 177 Wear_Leveling_Count PO--C- 100 100 000 - 0 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 075 055 000 - 25 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 68 241 Total_LBAs_Written -O--CK 099 099 000 - 451210819 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 349 - # 2 Short offline Completed without error 00% 333 - # 3 Short offline Completed without error 00% 270 - # 4 Short offline Completed without error 00% 268 - # 5 Short offline Completed without error 00% 258 - # 6 Short offline Completed without error 00% 255 - # 7 Short offline Completed without error 00% 239 - # 8 Short offline Completed without error 00% 237 - # 9 Short offline Completed without error 00% 234 - #10 Short offline Completed without error 00% 232 - #11 Short offline Completed without error 00% 216 - #12 Short offline Completed without error 00% 194 - #13 Short offline Completed without error 00% 170 - #14 Short offline Completed without error 00% 146 - #15 Short offline Completed without error 00% 122 - #16 Short offline Completed without error 00% 98 - #17 Short offline Completed without error 00% 81 - #18 Short offline Completed without error 00% 62 - #19 Short offline Completed without error 00% 41 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 22/27 Celsius Lifetime Min/Max Temperature: 22/40 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (33) Index Estimated Time Temperature Celsius 34 2023-07-28 17:10 24 ***** ... ..( 10 skipped). .. ***** 45 2023-07-28 19:00 24 ***** 46 2023-07-28 19:10 ? - 47 2023-07-28 19:20 25 ****** 48 2023-07-28 19:30 26 ******* 49 2023-07-28 19:40 29 ********** 50 2023-07-28 19:50 26 ******* 51 2023-07-28 20:00 26 ******* 52 2023-07-28 20:10 25 ****** 53 2023-07-28 20:20 25 ****** 54 2023-07-28 20:30 25 ****** 55 2023-07-28 20:40 26 ******* ... ..( 7 skipped). .. ******* 63 2023-07-28 22:00 26 ******* 64 2023-07-28 22:10 27 ******** 65 2023-07-28 22:20 27 ******** 66 2023-07-28 22:30 27 ******** 67 2023-07-28 22:40 33 ************** 68 2023-07-28 22:50 26 ******* 69 2023-07-28 23:00 23 **** 70 2023-07-28 23:10 ? - 71 2023-07-28 23:20 23 **** 72 2023-07-28 23:30 24 ***** 73 2023-07-28 23:40 23 **** ... ..( 69 skipped). .. **** 15 2023-07-29 11:20 23 **** 16 2023-07-29 11:30 24 ***** 17 2023-07-29 11:40 23 **** 18 2023-07-29 11:50 23 **** 19 2023-07-29 12:00 ? - 20 2023-07-29 12:10 25 ****** ... ..( 3 skipped). .. ****** 24 2023-07-29 12:50 25 ****** 25 2023-07-29 13:00 26 ******* 26 2023-07-29 13:10 26 ******* 27 2023-07-29 13:20 26 ******* 28 2023-07-29 13:30 27 ******** 29 2023-07-29 13:40 24 ***** 30 2023-07-29 13:50 23 **** 31 2023-07-29 14:00 24 ***** 32 2023-07-29 14:10 24 ***** 33 2023-07-29 14:20 23 **** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 84 --- Lifetime Power-On Resets 0x01 0x010 4 351 --- Power-on Hours 0x01 0x018 6 451210819 --- Logical Sectors Written 0x01 0x020 6 1661685 --- Number of Write Commands 0x01 0x028 6 304761080 --- Logical Sectors Read 0x01 0x030 6 1824375 --- Number of Read Commands 0x01 0x038 6 2515000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 25 --- Current Temperature 0x05 0x020 1 40 --- Highest Temperature 0x05 0x028 1 22 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 169 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.14.21-150500.55.7-default] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD753LJ Serial Number: -- LU WWN Device Id: 5 0000f0 ... Firmware Version: 1AA01109 User Capacity: 750,156,374,016 bytes [750 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Sat Jul 29 14:20:12 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 34) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11474) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 192) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 3 Spin_Up_Time POS--- 069 069 011 - 10200 4 Start_Stop_Count -O--CK 098 098 000 - 2430 5 Reallocated_Sector_Ct PO--CK 072 072 010 - 1215 7 Seek_Error_Rate POSR-- 100 100 051 - 0 8 Seek_Time_Performance P-S--K 100 100 015 - 9996 9 Power_On_Hours -O--CK 098 098 000 - 7811 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2416 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 183 Runtime_Bad_Block -O--CK 100 100 000 - 1 184 End-to-End_Error PO--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 079 047 000 - 21 (Min/Max 15/21) 194 Temperature_Celsius -O---K 079 046 000 - 21 (Min/Max 15/24) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 1825 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 20% 7810 - # 2 Short offline Aborted by host 00% 7794 - # 3 Short offline Aborted by host 00% 7786 - # 4 Short offline Aborted by host 00% 7784 - # 5 Short offline Aborted by host 00% 7767 - # 6 Short offline Aborted by host 20% 7765 - # 7 Short offline Aborted by host 00% 7763 - # 8 Short offline Aborted by host 20% 7760 - # 9 Short offline Aborted by host 00% 7744 - #10 Short offline Aborted by host 00% 7722 - #11 Short offline Aborted by host 00% 7698 - #12 Short offline Aborted by host 00% 7674 - #13 Short offline Aborted by host 20% 7650 - #14 Short offline Aborted by host 20% 7625 - #15 Short offline Aborted by host 90% 7608 - #16 Short offline Aborted by host 00% 7590 - #17 Short offline Aborted by host 20% 7468 - #18 Short offline Aborted by host 30% 7439 - #19 Extended offline Aborted by host 90% 7430 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 21 Celsius Power Cycle Min/Max Temperature: --/24 Celsius Lifetime Min/Max Temperature: --/55 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (114) Index Estimated Time Temperature Celsius 115 2023-07-29 12:13 21 ** 116 2023-07-29 12:14 22 *** ... ..( 7 skipped). .. *** 124 2023-07-29 12:22 22 *** 125 2023-07-29 12:23 23 **** 126 2023-07-29 12:24 24 ***** ... ..( 35 skipped). .. ***** 34 2023-07-29 13:00 24 ***** 35 2023-07-29 13:01 23 **** 36 2023-07-29 13:02 24 ***** ... ..( 17 skipped). .. ***** 54 2023-07-29 13:20 24 ***** 55 2023-07-29 13:21 23 **** ... ..( 4 skipped). .. **** 60 2023-07-29 13:26 23 **** 61 2023-07-29 13:27 22 *** ... ..( 5 skipped). .. *** 67 2023-07-29 13:33 22 *** 68 2023-07-29 13:34 21 ** ... ..( 15 skipped). .. ** 84 2023-07-29 13:50 21 ** 85 2023-07-29 13:51 20 * 86 2023-07-29 13:52 20 * 87 2023-07-29 13:53 21 ** 88 2023-07-29 13:54 20 * 89 2023-07-29 13:55 20 * 90 2023-07-29 13:56 21 ** 91 2023-07-29 13:57 20 * 92 2023-07-29 13:58 20 * 93 2023-07-29 13:59 20 * 94 2023-07-29 14:00 21 ** 95 2023-07-29 14:01 21 ** 96 2023-07-29 14:02 20 * ... ..( 2 skipped). .. * 99 2023-07-29 14:05 20 * 100 2023-07-29 14:06 21 ** ... ..( 13 skipped). .. ** 114 2023-07-29 14:20 21 ** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC