[ 7.416] (--) Log file renamed from "/var/log/Xorg.pid-999.log" to "/var/log/Xorg.0.log" [ 7.417] X.Org X Server 1.21.1.18 X Protocol Version 11, Revision 0 [ 7.417] Current Operating System: Linux XXX 6.17.2-arch1-1 #1 SMP PREEMPT_DYNAMIC Sun, 12 Oct 2025 12:45:18 +0000 x86_64 [ 7.417] Kernel command line: initrd=\0a915819871e42e1a0d570dad7cde191\6.17.2-arch1-1\initrd nvme_load=YES nowatchdog rw rootflags=subvol=/@ root=UUID=HASH_5ED-0DB6-693B-5A5D-EB4924F0E043 resume=UUID=HASH_82F-8FEC-D359-EC1D-85E997DB939C systemd.machine_id=0a915819871e42e1a0d570dad7cde191 [ 7.417] [ 7.417] Current version of pixman: 0.46.4 [ 7.417] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 7.417] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 7.417] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 17 10:34:35 2025 [ 7.417] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 7.417] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 7.417] (==) No Layout section. Using the first Screen section. [ 7.417] (==) No screen section available. Using defaults. [ 7.417] (**) |-->Screen "Default Screen Section" (0) [ 7.417] (**) | |-->Monitor "<default monitor>" [ 7.417] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 7.417] (**) Allowing byte-swapped clients [ 7.417] (==) Automatically adding devices [ 7.417] (==) Automatically enabling devices [ 7.417] (==) Automatically adding GPU devices [ 7.417] (==) Automatically binding GPU devices [ 7.417] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 7.417] (WW) The directory "/usr/share/fonts/misc" does not exist. [ 7.417] Entry deleted from font path. [ 7.418] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 7.418] Entry deleted from font path. [ 7.418] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 7.418] (WW) The directory "/usr/share/fonts/OTF" does not exist. [ 7.418] Entry deleted from font path. [ 7.418] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 7.418] Entry deleted from font path. [ 7.418] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 7.418] Entry deleted from font path. [ 7.418] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 7.418] Entry deleted from font path. [ 7.418] (==) FontPath set to: [ 7.418] (==) ModulePath set to "/usr/lib/xorg/modules" [ 7.418] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 7.418] (II) Module ABI versions: [ 7.418] X.Org ANSI C Emulation: 0.4 [ 7.418] X.Org Video Driver: 25.2 [ 7.418] X.Org XInput driver : 24.4 [ 7.418] X.Org Server Extension : 10.0 [ 7.418] (++) using VT number 2 [ 7.418] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 7.419] (II) xfree86: Adding drm device (/dev/dri/card1) [ 7.419] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1 [ 7.427] (--) PCI:*(0@0:2:0) 8086:46aa:103c:8a28 rev 12, Mem @ 0x603d000000/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072 [ 7.427] (II) LoadModule: "glx" [ 7.427] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 7.432] (II) Module glx: vendor="X.Org Foundation" [ 7.432] compiled for 1.21.1.18, module version = 1.0.0 [ 7.432] ABI class: X.Org Server Extension, version 10.0 [ 7.432] (==) Matched intel as autoconfigured driver 0 [ 7.432] (==) Matched modesetting as autoconfigured driver 1 [ 7.432] (==) Matched fbdev as autoconfigured driver 2 [ 7.432] (==) Matched vesa as autoconfigured driver 3 [ 7.432] (==) Assigned the driver to the xf86ConfigLayout [ 7.432] (II) LoadModule: "intel" [ 7.432] (WW) Warning, couldn't open module intel [ 7.432] (EE) Failed to load module "intel" (module does not exist, 0) [ 7.432] (II) LoadModule: "modesetting" [ 7.432] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 7.433] (II) Module modesetting: vendor="X.Org Foundation" [ 7.433] compiled for 1.21.1.18, module version = 1.21.1 [ 7.433] Module class: X.Org Video Driver [ 7.433] ABI class: X.Org Video Driver, version 25.2 [ 7.433] (II) LoadModule: "fbdev" [ 7.433] (WW) Warning, couldn't open module fbdev [ 7.433] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 7.433] (II) LoadModule: "vesa" [ 7.433] (WW) Warning, couldn't open module vesa [ 7.433] (EE) Failed to load module "vesa" (module does not exist, 0) [ 7.433] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 7.459] (II) modeset(0): using drv /dev/dri/card1 [ 7.460] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 7.460] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 7.460] (==) modeset(0): RGB weight 888 [ 7.460] (==) modeset(0): Default visual is TrueColor [ 7.460] (II) Loading sub module "glamoregl" [ 7.460] (II) LoadModule: "glamoregl" [ 7.460] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 7.469] (II) Module glamoregl: vendor="X.Org Foundation" [ 7.469] compiled for 1.21.1.18, module version = 1.0.1 [ 7.469] ABI class: X.Org ANSI C Emulation, version 0.4 [ 7.621] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Iris(R) Xe Graphics (ADL GT2) [ 7.621] (II) modeset(0): glamor initialized [ 7.621] (==) modeset(0): VariableRefresh: disabled [ 7.621] (==) modeset(0): AsyncFlipSecondaries: disabled [ 7.622] (II) modeset(0): Output eDP-1 has no monitor section [ 7.627] (II) modeset(0): Output HDMI-1 has no monitor section [ 7.627] (II) modeset(0): Output DP-1 has no monitor section [ 7.627] (II) modeset(0): Output DP-2 has no monitor section [ 7.627] (II) modeset(0): Output DP-3 has no monitor section [ 7.627] (II) modeset(0): Output DP-4 has no monitor section [ 7.629] (II) modeset(0): EDID for output eDP-1 [ 7.629] (II) modeset(0): Manufacturer: LGD Model: 722 Serial#: ... [ 7.629] (II) modeset(0): Year: 2021 Week: 0 [ 7.629] (II) modeset(0): EDID Version: 1.4 [ 7.629] (II) modeset(0): Digital Display Input [ 7.629] (II) modeset(0): 8 bits per channel [ 7.629] (II) modeset(0): Digital interface is DisplayPort [ 7.629] (II) modeset(0): Max Image Size [cm]: horiz.: 29 vert.: 18 [ 7.629] (II) modeset(0): Gamma: 2.20 [ 7.629] (II) modeset(0): No DPMS capabilities specified [ 7.629] (II) modeset(0): Supported color encodings: RGB 4:4:4 [ 7.629] (II) modeset(0): Default color space is primary color space [ 7.629] (II) modeset(0): First detailed timing is preferred mode [ 7.629] (II) modeset(0): Preferred mode is native pixel format and refresh rate [ 7.629] (II) modeset(0): Display is continuous-frequency [ 7.629] (II) modeset(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.610 [ 7.629] (II) modeset(0): blueX: 0.150 blueY: 0.055 whiteX: 0.313 whiteY: 0.329 [ 7.629] (II) modeset(0): Manufacturer's mask: 0 [ 7.629] (II) modeset(0): Supported detailed timing: [ 7.629] (II) modeset(0): clock: 154.1 MHz Image Size: 286 x 179 mm [ 7.629] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 7.629] (II) modeset(0): v_active: 1200 v_sync: 1203 v_sync_end 1208 v_blanking: 1235 v_border: 0 [ 7.629] (II) modeset(0): Supported detailed timing: [ 7.629] (II) modeset(0): clock: 102.8 MHz Image Size: 286 x 179 mm [ 7.629] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 7.629] (II) modeset(0): v_active: 1200 v_sync: 1203 v_sync_end 1208 v_blanking: 1235 v_border: 0 [ 7.629] (II) modeset(0): Unknown vendor-specific block 2 [ 7.629] (II) modeset(0): Number of EDID sections to follow: 1 [ 7.629] (II) modeset(0): EDID (in hex): [ 7.629] (II) modeset(0): 00ffffffffffff0030e4220700000000 [ 7.630] (II) modeset(0): 001f0104a51d127807ad85a6544c9c26 [ 7.630] (II) modeset(0): 0e505400000001010101010101010101 [ 7.630] (II) modeset(0): 010101010101353c80a070b023403020 [ 7.630] (II) modeset(0): 35001eb31000001a232880a070b02340 [ 7.630] (II) modeset(0): 302035001eb31000001a000000000000 [ 7.630] (II) modeset(0): 00000000000000000000000000000002 [ 7.630] (II) modeset(0): 000c2dff113caa0b0f27aa0000000137 [ 7.630] (II) modeset(0): 70207900002501095e9101115a02283c [ 7.630] (II) modeset(0): 80810013721a00000301283c00005857 [ 7.630] (II) modeset(0): 58573c00000000000000000000000000 [ 7.630] (II) modeset(0): 00000000000000000000000000000000 [ 7.630] (II) modeset(0): 00000000000000000000000000000000 [ 7.630] (II) modeset(0): 00000000000000000000000000000000 [ 7.630] (II) modeset(0): 00000000000000000000000000000000 [ 7.630] (II) modeset(0): 0000000000000000000000000000d590 [ 7.630] (II) modeset(0): Printing probed modes for output eDP-1 [ 7.630] (II) modeset(0): Modeline "1920x1200"x60.0 154.13 1920 1968 2000 2080 1200 1203 1208 1235 +hsync -vsync (74.1 kHz eP) [ 7.630] (II) modeset(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz d) [ 7.630] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz d) [ 7.630] (II) modeset(0): Modeline "1920x1200"x40.0 102.75 1920 1968 2000 2080 1200 1203 1208 1235 +hsync -vsync (49.4 kHz e) [ 7.630] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d) [ 7.630] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d) [ 7.630] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d) [ 7.630] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d) [ 7.630] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d) [ 7.630] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d) [ 7.630] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d) [ 7.630] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d) [ 7.630] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d) [ 7.630] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d) [ 7.630] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d) [ 7.630] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d) [ 7.630] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d) [ 7.630] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d) [ 7.630] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d) [ 7.630] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d) [ 7.630] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d) [ 7.630] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d) [ 7.630] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d) [ 7.630] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d) [ 7.630] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d) [ 7.630] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d) [ 7.630] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d) [ 7.630] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d) [ 7.630] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d) [ 7.630] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d) [ 7.630] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d) [ 7.630] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d) [ 7.630] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d) [ 7.630] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 7.630] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) [ 7.630] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d) [ 7.630] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d) [ 7.630] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d) [ 7.630] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d) [ 7.630] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d) [ 7.630] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d) [ 7.630] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d) [ 7.630] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d) [ 7.630] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d) [ 7.630] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d) [ 7.630] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d) [ 7.630] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d) [ 7.630] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) [ 7.630] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 7.630] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 7.630] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d) [ 7.630] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d) [ 7.630] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d) [ 7.630] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d) [ 7.630] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) [ 7.630] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d) [ 7.630] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d) [ 7.630] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [ 7.630] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d) [ 7.630] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d) [ 7.630] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) [ 7.630] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 7.630] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d) [ 7.630] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d) [ 7.630] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d) [ 7.631] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d) [ 7.631] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d) [ 7.631] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d) [ 7.631] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d) [ 7.631] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d) [ 7.631] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d) [ 7.631] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d) [ 7.631] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 7.631] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d) [ 7.631] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d) [ 7.631] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d) [ 7.631] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d) [ 7.631] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [ 7.631] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) [ 7.631] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d) [ 7.631] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d) [ 7.631] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) [ 7.631] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d) [ 7.631] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d) [ 7.631] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d) [ 7.631] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d) [ 7.636] (II) modeset(0): EDID for output HDMI-1 [ 7.636] (II) modeset(0): EDID for output DP-1 [ 7.636] (II) modeset(0): EDID for output DP-2 [ 7.636] (II) modeset(0): EDID for output DP-3 [ 7.636] (II) modeset(0): EDID for output DP-4 [ 7.636] (II) modeset(0): Output eDP-1 connected [ 7.636] (II) modeset(0): Output HDMI-1 disconnected [ 7.636] (II) modeset(0): Output DP-1 disconnected [ 7.636] (II) modeset(0): Output DP-2 disconnected [ 7.636] (II) modeset(0): Output DP-3 disconnected [ 7.636] (II) modeset(0): Output DP-4 disconnected [ 7.636] (II) modeset(0): Using exact sizes for initial modes [ 7.636] (II) modeset(0): Output eDP-1 using initial mode 1920x1200 +0+0 [ 7.636] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 7.636] (==) modeset(0): DPI set to (96, 96) [ 7.636] (II) Loading sub module "fb" [ 7.636] (II) LoadModule: "fb" [ 7.636] (II) Module "fb" already built-in [ 7.668] (==) modeset(0): Backing store enabled [ 7.668] (==) modeset(0): Silken mouse enabled [ 7.761] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 7.761] (==) modeset(0): DPMS enabled [ 7.761] (II) modeset(0): [DRI2] Setup complete [ 7.761] (II) modeset(0): [DRI2] DRI driver: iris [ 7.761] (II) modeset(0): [DRI2] VDPAU driver: va_gl [ 7.761] (II) Initializing extension Generic Event Extension [ 7.761] (II) Initializing extension SHAPE [ 7.762] (II) Initializing extension MIT-SHM [ 7.762] (II) Initializing extension XInputExtension [ 7.762] (II) Initializing extension XTEST [ 7.762] (II) Initializing extension BIG-REQUESTS [ 7.763] (II) Initializing extension SYNC [ 7.763] (II) Initializing extension XKEYBOARD [ 7.763] (II) Initializing extension XC-MISC [ 7.763] (II) Initializing extension SECURITY [ 7.764] (II) Initializing extension XFIXES [ 7.764] (II) Initializing extension RENDER [ 7.764] (II) Initializing extension RANDR [ 7.764] (II) Initializing extension COMPOSITE [ 7.765] (II) Initializing extension DAMAGE [ 7.765] (II) Initializing extension MIT-SCREEN-SAVER [ 7.765] (II) Initializing extension DOUBLE-BUFFER [ 7.765] (II) Initializing extension RECORD [ 7.765] (II) Initializing extension DPMS [ 7.765] (II) Initializing extension Present [ 7.766] (II) Initializing extension DRI3 [ 7.766] (II) Initializing extension X-Resource [ 7.766] (II) Initializing extension XVideo [ 7.766] (II) Initializing extension XVideo-MotionCompensation [ 7.766] (II) Initializing extension GLX [ 7.777] (II) AIGLX: Loaded and initialized iris [ 7.777] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 7.777] (II) Initializing extension XFree86-VidModeExtension [ 7.777] (II) Initializing extension XFree86-DGA [ 7.777] (II) Initializing extension XFree86-DRI [ 7.777] (II) Initializing extension DRI2 [ 7.777] (II) modeset(0): Damage tracking initialized [ 7.777] (II) modeset(0): Setting screen physical size to 508 x 317 [ 7.872] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 7.872] (**) Power Button: Applying InputClass "devname" [ 7.872] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 7.872] (**) Power Button: Applying InputClass "system-keyboard" [ 7.872] (II) LoadModule: "libinput" [ 7.872] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 7.876] (II) Module libinput: vendor="X.Org Foundation" [ 7.876] compiled for 1.21.1.13, module version = 1.5.0 [ 7.876] Module class: X.Org XInput Driver [ 7.876] ABI class: X.Org XInput driver, version 24.4 [ 7.876] (II) Using input driver 'libinput' for 'Power Button' [ 7.876] (**) Power Button: always reports core events [ 7.876] (**) Option "Device" "/dev/input/event2" [ 7.880] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 7.880] (II) event2 - Power Button: device is a keyboard [ 7.880] (II) event2 - Power Button: device removed [ 7.890] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 7.890] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 7.890] (**) Option "xkb_layout" "fr" [ 7.890] (**) Option "xkb_variant" "azerty" [ 7.919] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 7.919] (II) event2 - Power Button: device is a keyboard [ 7.920] (II) config/udev: Adding input device Video Bus (/dev/input/event16) [ 7.920] (**) Video Bus: Applying InputClass "devname" [ 7.920] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 7.920] (**) Video Bus: Applying InputClass "system-keyboard" [ 7.920] (II) Using input driver 'libinput' for 'Video Bus' [ 7.920] (**) Video Bus: always reports core events [ 7.920] (**) Option "Device" "/dev/input/event16" [ 7.921] (II) event16 - Video Bus: is tagged by udev as: Keyboard [ 7.921] (II) event16 - Video Bus: device is a keyboard [ 7.922] (II) event16 - Video Bus: device removed [ 7.939] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21/event16" [ 7.939] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 7.939] (**) Option "xkb_layout" "fr" [ 7.939] (**) Option "xkb_variant" "azerty" [ 7.942] (II) event16 - Video Bus: is tagged by udev as: Keyboard [ 7.942] (II) event16 - Video Bus: device is a keyboard [ 7.943] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 7.943] (**) Lid Switch: Applying InputClass "devname" [ 7.943] (II) Using input driver 'libinput' for 'Lid Switch' [ 7.943] (**) Lid Switch: always reports core events [ 7.943] (**) Option "Device" "/dev/input/event0" [ 7.945] (II) event0 - Lid Switch: is tagged by udev as: Switch [ 7.945] (II) event0 - Lid Switch: device is a switch device [ 7.945] (II) event0 - Lid Switch: device removed [ 7.957] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/PNP0C0D:00/input/input0/event0" [ 7.957] (II) XINPUT: Adding extended input device "Lid Switch" (type: KEYBOARD, id 8) [ 7.959] (II) event0 - Lid Switch: is tagged by udev as: Switch [ 7.959] (II) event0 - Lid Switch: device is a switch device [ 7.961] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 7.961] (**) Power Button: Applying InputClass "devname" [ 7.961] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 7.961] (**) Power Button: Applying InputClass "system-keyboard" [ 7.961] (II) Using input driver 'libinput' for 'Power Button' [ 7.961] (**) Power Button: always reports core events [ 7.961] (**) Option "Device" "/dev/input/event1" [ 7.962] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 7.962] (II) event1 - Power Button: device is a keyboard [ 7.962] (II) event1 - Power Button: device removed [ 7.978] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 7.978] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9) [ 7.978] (**) Option "xkb_layout" "fr" [ 7.978] (**) Option "xkb_variant" "azerty" [ 7.981] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 7.981] (II) event1 - Power Button: device is a keyboard [ 7.984] (II) config/udev: Adding input device Compx 2.4G Receiver (/dev/input/event4) [ 7.984] (**) Compx 2.4G Receiver: Applying InputClass "devname" [ 7.984] (**) Compx 2.4G Receiver: Applying InputClass "libinput keyboard catchall" [ 7.984] (**) Compx 2.4G Receiver: Applying InputClass "system-keyboard" [ 7.984] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver' [ 7.984] (**) Compx 2.4G Receiver: always reports core events [ 7.984] (**) Option "Device" "/dev/input/event4" [ 7.986] (II) event4 - Compx 2.4G Receiver: is tagged by udev as: Keyboard [ 7.986] (II) event4 - Compx 2.4G Receiver: device is a keyboard [ 7.986] (II) event4 - Compx 2.4G Receiver: device removed [ 7.999] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:25A7:FA61.0001/input/input4/event4" [ 7.999] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver" (type: KEYBOARD, id 10) [ 7.999] (**) Option "xkb_layout" "fr" [ 7.999] (**) Option "xkb_variant" "azerty" [ 8.002] (II) event4 - Compx 2.4G Receiver: is tagged by udev as: Keyboard [ 8.003] (II) event4 - Compx 2.4G Receiver: device is a keyboard [ 8.004] (II) config/udev: Adding input device Compx 2.4G Receiver Mouse (/dev/input/event5) [ 8.004] (**) Compx 2.4G Receiver Mouse: Applying InputClass "devname" [ 8.004] (**) Compx 2.4G Receiver Mouse: Applying InputClass "libinput pointer catchall" [ 8.004] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Mouse' [ 8.004] (**) Compx 2.4G Receiver Mouse: always reports core events [ 8.004] (**) Option "Device" "/dev/input/event5" [ 8.006] (II) event5 - Compx 2.4G Receiver Mouse: is tagged by udev as: Mouse [ 8.006] (II) event5 - Compx 2.4G Receiver Mouse: device is a pointer [ 8.007] (II) event5 - Compx 2.4G Receiver Mouse: device removed [ 8.034] (II) libinput: Compx 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.034] (II) libinput: Compx 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.034] (II) libinput: Compx 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.034] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:25A7:FA61.0002/input/input5/event5" [ 8.034] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver Mouse" (type: MOUSE, id 11) [ 8.035] (**) Option "AccelerationScheme" "none" [ 8.035] (**) Compx 2.4G Receiver Mouse: (accel) selected scheme none/0 [ 8.035] (**) Compx 2.4G Receiver Mouse: (accel) acceleration factor: 2.000 [ 8.035] (**) Compx 2.4G Receiver Mouse: (accel) acceleration threshold: 4 [ 8.038] (II) event5 - Compx 2.4G Receiver Mouse: is tagged by udev as: Mouse [ 8.038] (II) event5 - Compx 2.4G Receiver Mouse: device is a pointer [ 8.040] (II) config/udev: Adding input device Compx 2.4G Receiver Mouse (/dev/input/mouse0) [ 8.040] (**) Compx 2.4G Receiver Mouse: Applying InputClass "devname" [ 8.040] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Mouse' [ 8.040] (**) Compx 2.4G Receiver Mouse: always reports core events [ 8.040] (**) Option "Device" "/dev/input/mouse0" [ 8.065] (II) mouse0 - not using input device '/dev/input/mouse0'. [ 8.065] (EE) libinput: Compx 2.4G Receiver Mouse: Failed to create a device for /dev/input/mouse0 [ 8.065] (EE) PreInit returned 2 for "Compx 2.4G Receiver Mouse" [ 8.065] (II) UnloadModule: "libinput" [ 8.066] (II) config/udev: Adding input device Compx 2.4G Receiver (/dev/input/event6) [ 8.066] (**) Compx 2.4G Receiver: Applying InputClass "devname" [ 8.066] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver' [ 8.066] (**) Compx 2.4G Receiver: always reports core events [ 8.066] (**) Option "Device" "/dev/input/event6" [ 8.068] (II) event6 - Compx 2.4G Receiver: not tagged as supported input device [ 8.088] (II) event6 - not using input device '/dev/input/event6'. [ 8.088] (EE) libinput: Compx 2.4G Receiver: Failed to create a device for /dev/input/event6 [ 8.088] (EE) PreInit returned 2 for "Compx 2.4G Receiver" [ 8.088] (II) UnloadModule: "libinput" [ 8.091] (II) config/udev: Adding input device Compx 2.4G Receiver Consumer Control (/dev/input/event7) [ 8.091] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "devname" [ 8.091] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 8.091] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "system-keyboard" [ 8.091] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Consumer Control' [ 8.091] (**) Compx 2.4G Receiver Consumer Control: always reports core events [ 8.091] (**) Option "Device" "/dev/input/event7" [ 8.095] (II) event7 - Compx 2.4G Receiver Consumer Control: is tagged by udev as: Keyboard [ 8.095] (II) event7 - Compx 2.4G Receiver Consumer Control: device is a keyboard [ 8.095] (II) event7 - Compx 2.4G Receiver Consumer Control: device removed [ 8.111] (II) libinput: Compx 2.4G Receiver Consumer Control: needs a virtual subdevice [ 8.111] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:25A7:FA61.0002/input/input7/event7" [ 8.111] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver Consumer Control" (type: MOUSE, id 12) [ 8.111] (**) Option "AccelerationScheme" "none" [ 8.111] (**) Compx 2.4G Receiver Consumer Control: (accel) selected scheme none/0 [ 8.111] (**) Compx 2.4G Receiver Consumer Control: (accel) acceleration factor: 2.000 [ 8.111] (**) Compx 2.4G Receiver Consumer Control: (accel) acceleration threshold: 4 [ 8.114] (II) event7 - Compx 2.4G Receiver Consumer Control: is tagged by udev as: Keyboard [ 8.114] (II) event7 - Compx 2.4G Receiver Consumer Control: device is a keyboard [ 8.116] (II) config/udev: Adding input device Compx 2.4G Receiver System Control (/dev/input/event8) [ 8.116] (**) Compx 2.4G Receiver System Control: Applying InputClass "devname" [ 8.116] (**) Compx 2.4G Receiver System Control: Applying InputClass "libinput keyboard catchall" [ 8.116] (**) Compx 2.4G Receiver System Control: Applying InputClass "system-keyboard" [ 8.116] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver System Control' [ 8.116] (**) Compx 2.4G Receiver System Control: always reports core events [ 8.116] (**) Option "Device" "/dev/input/event8" [ 8.117] (II) event8 - Compx 2.4G Receiver System Control: is tagged by udev as: Keyboard [ 8.117] (II) event8 - Compx 2.4G Receiver System Control: device is a keyboard [ 8.118] (II) event8 - Compx 2.4G Receiver System Control: device removed [ 8.124] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:25A7:FA61.0002/input/input8/event8" [ 8.124] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver System Control" (type: KEYBOARD, id 13) [ 8.124] (**) Option "xkb_layout" "fr" [ 8.124] (**) Option "xkb_variant" "azerty" [ 8.126] (II) event8 - Compx 2.4G Receiver System Control: is tagged by udev as: Keyboard [ 8.127] (II) event8 - Compx 2.4G Receiver System Control: device is a keyboard [ 8.128] (II) config/udev: Adding input device SYNA32CF:00 06CB:CECD Mouse (/dev/input/event9) [ 8.128] (**) SYNA32CF:00 06CB:CECD Mouse: Applying InputClass "devname" [ 8.128] (**) SYNA32CF:00 06CB:CECD Mouse: Applying InputClass "libinput pointer catchall" [ 8.128] (II) Using input driver 'libinput' for 'SYNA32CF:00 06CB:CECD Mouse' [ 8.128] (**) SYNA32CF:00 06CB:CECD Mouse: always reports core events [ 8.128] (**) Option "Device" "/dev/input/event9" [ 8.144] (II) event9 - SYNA32CF:00 06CB:CECD Mouse: is tagged by udev as: Mouse Pointingstick [ 8.145] (II) event9 - SYNA32CF:00 06CB:CECD Mouse: device is a pointer [ 8.146] (II) event9 - SYNA32CF:00 06CB:CECD Mouse: device removed [ 8.172] (II) libinput: SYNA32CF:00 06CB:CECD Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.172] (II) libinput: SYNA32CF:00 06CB:CECD Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.172] (II) libinput: SYNA32CF:00 06CB:CECD Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.172] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.1/i2c-1/i2c-SYNA32CF:00/0018:06CB:CECD.0003/input/input13/event9" [ 8.172] (II) XINPUT: Adding extended input device "SYNA32CF:00 06CB:CECD Mouse" (type: MOUSE, id 14) [ 8.172] (**) Option "AccelerationScheme" "none" [ 8.172] (**) SYNA32CF:00 06CB:CECD Mouse: (accel) selected scheme none/0 [ 8.173] (**) SYNA32CF:00 06CB:CECD Mouse: (accel) acceleration factor: 2.000 [ 8.173] (**) SYNA32CF:00 06CB:CECD Mouse: (accel) acceleration threshold: 4 [ 8.177] (II) event9 - SYNA32CF:00 06CB:CECD Mouse: is tagged by udev as: Mouse Pointingstick [ 8.178] (II) event9 - SYNA32CF:00 06CB:CECD Mouse: device is a pointer [ 8.180] (II) config/udev: Adding input device SYNA32CF:00 06CB:CECD Mouse (/dev/input/mouse1) [ 8.180] (**) SYNA32CF:00 06CB:CECD Mouse: Applying InputClass "devname" [ 8.180] (II) Using input driver 'libinput' for 'SYNA32CF:00 06CB:CECD Mouse' [ 8.180] (**) SYNA32CF:00 06CB:CECD Mouse: always reports core events [ 8.180] (**) Option "Device" "/dev/input/mouse1" [ 8.209] (II) mouse1 - not using input device '/dev/input/mouse1'. [ 8.209] (EE) libinput: SYNA32CF:00 06CB:CECD Mouse: Failed to create a device for /dev/input/mouse1 [ 8.209] (EE) PreInit returned 2 for "SYNA32CF:00 06CB:CECD Mouse" [ 8.209] (II) UnloadModule: "libinput" [ 8.211] (II) config/udev: Adding input device SYNA32CF:00 06CB:CECD Touchpad (/dev/input/event10) [ 8.211] (**) SYNA32CF:00 06CB:CECD Touchpad: Applying InputClass "devname" [ 8.211] (**) SYNA32CF:00 06CB:CECD Touchpad: Applying InputClass "libinput touchpad catchall" [ 8.211] (II) Using input driver 'libinput' for 'SYNA32CF:00 06CB:CECD Touchpad' [ 8.211] (**) SYNA32CF:00 06CB:CECD Touchpad: always reports core events [ 8.211] (**) Option "Device" "/dev/input/event10" [ 8.214] (II) event10 - SYNA32CF:00 06CB:CECD Touchpad: is tagged by udev as: Touchpad [ 8.216] (II) event10 - SYNA32CF:00 06CB:CECD Touchpad: device is a touchpad [ 8.217] (II) event10 - SYNA32CF:00 06CB:CECD Touchpad: device removed [ 8.246] (**) Option "Tapping" "on" [ 8.246] (II) libinput: SYNA32CF:00 06CB:CECD Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.246] (II) libinput: SYNA32CF:00 06CB:CECD Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.246] (II) libinput: SYNA32CF:00 06CB:CECD Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.247] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.1/i2c-1/i2c-SYNA32CF:00/0018:06CB:CECD.0003/input/input14/event10" [ 8.247] (II) XINPUT: Adding extended input device "SYNA32CF:00 06CB:CECD Touchpad" (type: TOUCHPAD, id 15) [ 8.251] (**) Option "AccelerationScheme" "none" [ 8.251] (**) SYNA32CF:00 06CB:CECD Touchpad: (accel) selected scheme none/0 [ 8.251] (**) SYNA32CF:00 06CB:CECD Touchpad: (accel) acceleration factor: 2.000 [ 8.251] (**) SYNA32CF:00 06CB:CECD Touchpad: (accel) acceleration threshold: 4 [ 8.253] (II) event10 - SYNA32CF:00 06CB:CECD Touchpad: is tagged by udev as: Touchpad [ 8.255] (II) event10 - SYNA32CF:00 06CB:CECD Touchpad: device is a touchpad [ 8.256] (II) config/udev: Adding input device SYNA32CF:00 06CB:CECD Touchpad (/dev/input/mouse2) [ 8.256] (**) SYNA32CF:00 06CB:CECD Touchpad: Applying InputClass "devname" [ 8.256] (II) Using input driver 'libinput' for 'SYNA32CF:00 06CB:CECD Touchpad' [ 8.256] (**) SYNA32CF:00 06CB:CECD Touchpad: always reports core events [ 8.256] (**) Option "Device" "/dev/input/mouse2" [ 8.272] (II) mouse2 - not using input device '/dev/input/mouse2'. [ 8.272] (EE) libinput: SYNA32CF:00 06CB:CECD Touchpad: Failed to create a device for /dev/input/mouse2 [ 8.272] (EE) PreInit returned 2 for "SYNA32CF:00 06CB:CECD Touchpad" [ 8.272] (II) UnloadModule: "libinput" [ 8.274] (II) config/udev: Adding input device Intel HID events (/dev/input/event11) [ 8.274] (**) Intel HID events: Applying InputClass "devname" [ 8.274] (**) Intel HID events: Applying InputClass "libinput keyboard catchall" [ 8.274] (**) Intel HID events: Applying InputClass "system-keyboard" [ 8.274] (II) Using input driver 'libinput' for 'Intel HID events' [ 8.274] (**) Intel HID events: always reports core events [ 8.274] (**) Option "Device" "/dev/input/event11" [ 8.275] (II) event11 - Intel HID events: is tagged by udev as: Keyboard [ 8.275] (II) event11 - Intel HID events: device is a keyboard [ 8.276] (II) event11 - Intel HID events: device removed [ 8.291] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input16/event11" [ 8.291] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 16) [ 8.291] (**) Option "xkb_layout" "fr" [ 8.291] (**) Option "xkb_variant" "azerty" [ 8.293] (II) event11 - Intel HID events: is tagged by udev as: Keyboard [ 8.293] (II) event11 - Intel HID events: device is a keyboard [ 8.295] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event12) [ 8.295] (**) Intel HID 5 button array: Applying InputClass "devname" [ 8.295] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall" [ 8.295] (**) Intel HID 5 button array: Applying InputClass "system-keyboard" [ 8.295] (II) Using input driver 'libinput' for 'Intel HID 5 button array' [ 8.295] (**) Intel HID 5 button array: always reports core events [ 8.295] (**) Option "Device" "/dev/input/event12" [ 8.296] (II) event12 - Intel HID 5 button array: is tagged by udev as: Keyboard [ 8.296] (II) event12 - Intel HID 5 button array: device is a keyboard [ 8.296] (II) event12 - Intel HID 5 button array: device removed [ 8.311] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input17/event12" [ 8.311] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 17) [ 8.311] (**) Option "xkb_layout" "fr" [ 8.311] (**) Option "xkb_variant" "azerty" [ 8.313] (II) event12 - Intel HID 5 button array: is tagged by udev as: Keyboard [ 8.313] (II) event12 - Intel HID 5 button array: device is a keyboard [ 8.315] (II) config/udev: Adding input device Intel HID switches (/dev/input/event14) [ 8.315] (**) Intel HID switches: Applying InputClass "devname" [ 8.315] (II) Using input driver 'libinput' for 'Intel HID switches' [ 8.315] (**) Intel HID switches: always reports core events [ 8.315] (**) Option "Device" "/dev/input/event14" [ 8.316] (II) event14 - Intel HID switches: is tagged by udev as: Switch [ 8.316] (II) event14 - Intel HID switches: device is a switch device [ 8.316] (II) event14 - Intel HID switches: device removed [ 8.346] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input20/event14" [ 8.346] (II) XINPUT: Adding extended input device "Intel HID switches" (type: KEYBOARD, id 18) [ 8.348] (II) event14 - Intel HID switches: is tagged by udev as: Switch [ 8.348] (II) event14 - Intel HID switches: device is a switch device [ 8.350] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 8.350] (**) AT Translated Set 2 keyboard: Applying InputClass "devname" [ 8.350] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 8.350] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 8.350] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 8.350] (**) AT Translated Set 2 keyboard: always reports core events [ 8.350] (**) Option "Device" "/dev/input/event3" [ 8.352] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 8.352] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 8.354] (II) event3 - AT Translated Set 2 keyboard: device removed [ 8.366] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 8.366] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 19) [ 8.366] (**) Option "xkb_layout" "fr" [ 8.366] (**) Option "xkb_variant" "azerty" [ 8.368] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 8.368] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 8.371] (II) config/udev: Adding input device PC Speaker (/dev/input/event13) [ 8.371] (**) PC Speaker: Applying InputClass "devname" [ 8.371] (II) Using input driver 'libinput' for 'PC Speaker' [ 8.371] (**) PC Speaker: always reports core events [ 8.371] (**) Option "Device" "/dev/input/event13" [ 8.372] (II) event13 - PC Speaker: not tagged as supported input device [ 8.398] (II) event13 - not using input device '/dev/input/event13'. [ 8.398] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event13 [ 8.398] (EE) PreInit returned 2 for "PC Speaker" [ 8.398] (II) UnloadModule: "libinput" [ 8.404] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event15) [ 8.404] (**) HP WMI hotkeys: Applying InputClass "devname" [ 8.404] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 8.404] (**) HP WMI hotkeys: Applying InputClass "system-keyboard" [ 8.404] (II) Using input driver 'libinput' for 'HP WMI hotkeys' [ 8.404] (**) HP WMI hotkeys: always reports core events [ 8.404] (**) Option "Device" "/dev/input/event15" [ 8.405] (II) event15 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 8.405] (II) event15 - HP WMI hotkeys: device is a keyboard [ 8.405] (II) event15 - HP WMI hotkeys: device is a switch device [ 8.406] (II) event15 - HP WMI hotkeys: device removed [ 8.422] (**) Option "config_info" "udev:/sys/devices/virtual/input/input19/event15" [ 8.422] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 20) [ 8.422] (**) Option "xkb_layout" "fr" [ 8.422] (**) Option "xkb_variant" "azerty" [ 8.424] (II) event15 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 8.424] (II) event15 - HP WMI hotkeys: device is a keyboard [ 8.424] (II) event15 - HP WMI hotkeys: device is a switch device [ 8.432] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "devname" [ 8.432] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 8.432] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "system-keyboard" [ 8.432] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Consumer Control' [ 8.432] (**) Compx 2.4G Receiver Consumer Control: always reports core events [ 8.432] (**) Option "Device" "/dev/input/event7" [ 8.432] (II) libinput: Compx 2.4G Receiver Consumer Control: is a virtual subdevice [ 8.432] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:25A7:FA61.0002/input/input7/event7" [ 8.432] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver Consumer Control" (type: KEYBOARD, id 21) [ 8.432] (**) Option "xkb_layout" "fr" [ 8.432] (**) Option "xkb_variant" "azerty" [ 8.783] (II) event2 - Power Button: device removed [ 8.794] (II) event16 - Video Bus: device removed [ 8.823] (II) event0 - Lid Switch: device removed [ 8.839] (II) event1 - Power Button: device removed [ 8.847] (II) event4 - Compx 2.4G Receiver: device removed [ 8.851] (II) event5 - Compx 2.4G Receiver Mouse: device removed [ 8.859] (II) event8 - Compx 2.4G Receiver System Control: device removed [ 8.863] (II) event9 - SYNA32CF:00 06CB:CECD Mouse: device removed [ 8.871] (II) event10 - SYNA32CF:00 06CB:CECD Touchpad: device removed [ 8.885] (II) event11 - Intel HID events: device removed [ 8.889] (II) event12 - Intel HID 5 button array: device removed [ 8.893] (II) event14 - Intel HID switches: device removed [ 8.905] (II) event3 - AT Translated Set 2 keyboard: device removed [ 8.909] (II) event15 - HP WMI hotkeys: device removed [ 8.913] (II) event7 - Compx 2.4G Receiver Consumer Control: device removed [ 8.917] (II) AIGLX: Suspending AIGLX clients for VT switch [ 9.243] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=4 (/dev/input/event20) [ 9.243] (**) sof-hda-dsp HDMI/DP,pcm=4: Applying InputClass "devname" [ 9.243] (II) Using input driver 'libinput' for 'sof-hda-dsp HDMI/DP,pcm=4' [ 9.243] (**) sof-hda-dsp HDMI/DP,pcm=4: always reports core events [ 9.243] (**) Option "Device" "/dev/input/event20" [ 9.245] (II) event20 - sof-hda-dsp HDMI/DP,pcm=4: is tagged by udev as: Switch [ 9.267] (II) event20 - not using input device '/dev/input/event20'. [ 9.267] (EE) libinput: sof-hda-dsp HDMI/DP,pcm=4: Failed to create a device for /dev/input/event20 [ 9.267] (EE) PreInit returned 2 for "sof-hda-dsp HDMI/DP,pcm=4" [ 9.267] (II) UnloadModule: "libinput" [ 9.268] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=5 (/dev/input/event21) [ 9.268] (**) sof-hda-dsp HDMI/DP,pcm=5: Applying InputClass "devname" [ 9.268] (II) Using input driver 'libinput' for 'sof-hda-dsp HDMI/DP,pcm=5' [ 9.268] (**) sof-hda-dsp HDMI/DP,pcm=5: always reports core events [ 9.268] (**) Option "Device" "/dev/input/event21" [ 9.270] (II) event21 - sof-hda-dsp HDMI/DP,pcm=5: is tagged by udev as: Switch [ 9.290] (II) event21 - not using input device '/dev/input/event21'. [ 9.290] (EE) libinput: sof-hda-dsp HDMI/DP,pcm=5: Failed to create a device for /dev/input/event21 [ 9.290] (EE) PreInit returned 2 for "sof-hda-dsp HDMI/DP,pcm=5" [ 9.290] (II) UnloadModule: "libinput" [ 9.291] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=3 (/dev/input/event19) [ 9.291] (**) sof-hda-dsp HDMI/DP,pcm=3: Applying InputClass "devname" [ 9.291] (II) Using input driver 'libinput' for 'sof-hda-dsp HDMI/DP,pcm=3' [ 9.291] (**) sof-hda-dsp HDMI/DP,pcm=3: always reports core events [ 9.291] (**) Option "Device" "/dev/input/event19" [ 9.292] (II) event19 - sof-hda-dsp HDMI/DP,pcm=3: is tagged by udev as: Switch [ 9.313] (II) event19 - not using input device '/dev/input/event19'. [ 9.313] (EE) libinput: sof-hda-dsp HDMI/DP,pcm=3: Failed to create a device for /dev/input/event19 [ 9.313] (EE) PreInit returned 2 for "sof-hda-dsp HDMI/DP,pcm=3" [ 9.313] (II) UnloadModule: "libinput" [ 9.314] (II) config/udev: Adding input device sof-hda-dsp Headphone (/dev/input/event18) [ 9.314] (**) sof-hda-dsp Headphone: Applying InputClass "devname" [ 9.314] (II) Using input driver 'libinput' for 'sof-hda-dsp Headphone' [ 9.314] (**) sof-hda-dsp Headphone: always reports core events [ 9.314] (**) Option "Device" "/dev/input/event18" [ 9.315] (II) event18 - sof-hda-dsp Headphone: is tagged by udev as: Switch [ 9.344] (II) event18 - not using input device '/dev/input/event18'. [ 9.344] (EE) libinput: sof-hda-dsp Headphone: Failed to create a device for /dev/input/event18 [ 9.344] (EE) PreInit returned 2 for "sof-hda-dsp Headphone" [ 9.344] (II) UnloadModule: "libinput" [ 9.345] (II) config/udev: Adding input device sof-hda-dsp Mic (/dev/input/event17) [ 9.345] (**) sof-hda-dsp Mic: Applying InputClass "devname" [ 9.345] (II) Using input driver 'libinput' for 'sof-hda-dsp Mic' [ 9.345] (**) sof-hda-dsp Mic: always reports core events [ 9.345] (**) Option "Device" "/dev/input/event17" [ 9.346] (II) event17 - sof-hda-dsp Mic: is tagged by udev as: Switch [ 9.369] (II) event17 - not using input device '/dev/input/event17'. [ 9.369] (EE) libinput: sof-hda-dsp Mic: Failed to create a device for /dev/input/event17 [ 9.369] (EE) PreInit returned 2 for "sof-hda-dsp Mic" [ 9.369] (II) UnloadModule: "libinput" [ 19.169] (II) config/udev: Adding input device BT5.1 Mouse (/dev/input/mouse3) [ 19.169] (**) BT5.1 Mouse: Applying InputClass "devname" [ 19.169] (II) Using input driver 'libinput' for 'BT5.1 Mouse' [ 19.169] (**) BT5.1 Mouse: always reports core events [ 19.169] (**) Option "Device" "/dev/input/mouse3" [ 19.215] (II) mouse3 - not using input device '/dev/input/mouse3'. [ 19.215] (EE) libinput: BT5.1 Mouse: Failed to create a device for /dev/input/mouse3 [ 19.215] (EE) PreInit returned 2 for "BT5.1 Mouse" [ 19.215] (II) UnloadModule: "libinput" [ 19.217] (II) config/udev: Adding input device BT5.1 Mouse (/dev/input/event22) [ 19.217] (**) BT5.1 Mouse: Applying InputClass "devname" [ 19.217] (**) BT5.1 Mouse: Applying InputClass "libinput pointer catchall" [ 19.217] (II) Using input driver 'libinput' for 'BT5.1 Mouse' [ 19.217] (**) BT5.1 Mouse: always reports core events [ 19.217] (**) Option "Device" "/dev/input/event22" [ 19.219] (II) event22 - BT5.1 Mouse: is tagged by udev as: Mouse [ 19.220] (II) event22 - BT5.1 Mouse: device is a pointer [ 19.220] (II) event22 - BT5.1 Mouse: device removed [ 19.228] (II) libinput: BT5.1 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 19.229] (II) libinput: BT5.1 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 19.229] (II) libinput: BT5.1 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 19.229] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:32C2:6621.0008/input/input27/event22" [ 19.229] (II) XINPUT: Adding extended input device "BT5.1 Mouse" (type: MOUSE, id 22) [ 19.229] (**) Option "AccelerationScheme" "none" [ 19.229] (**) BT5.1 Mouse: (accel) selected scheme none/0 [ 19.229] (**) BT5.1 Mouse: (accel) acceleration factor: 2.000 [ 19.229] (**) BT5.1 Mouse: (accel) acceleration threshold: 4 [ 19.258] (II) config/udev: Adding input device BT5.1 Mouse Keyboard (/dev/input/event23) [ 19.258] (**) BT5.1 Mouse Keyboard: Applying InputClass "devname" [ 19.258] (**) BT5.1 Mouse Keyboard: Applying InputClass "libinput keyboard catchall" [ 19.258] (**) BT5.1 Mouse Keyboard: Applying InputClass "system-keyboard" [ 19.258] (II) Using input driver 'libinput' for 'BT5.1 Mouse Keyboard' [ 19.258] (**) BT5.1 Mouse Keyboard: always reports core events [ 19.258] (**) Option "Device" "/dev/input/event23" [ 19.260] (II) event23 - BT5.1 Mouse Keyboard: is tagged by udev as: Keyboard [ 19.260] (II) event23 - BT5.1 Mouse Keyboard: device is a keyboard [ 19.260] (II) event23 - BT5.1 Mouse Keyboard: device removed [ 19.270] (II) libinput: BT5.1 Mouse Keyboard: needs a virtual subdevice [ 19.270] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:32C2:6621.0008/input/input28/event23" [ 19.270] (II) XINPUT: Adding extended input device "BT5.1 Mouse Keyboard" (type: MOUSE, id 23) [ 19.270] (**) Option "AccelerationScheme" "none" [ 19.270] (**) BT5.1 Mouse Keyboard: (accel) selected scheme none/0 [ 19.270] (**) BT5.1 Mouse Keyboard: (accel) acceleration factor: 2.000 [ 19.270] (**) BT5.1 Mouse Keyboard: (accel) acceleration threshold: 4 [ 19.270] (**) BT5.1 Mouse Keyboard: Applying InputClass "devname" [ 19.270] (**) BT5.1 Mouse Keyboard: Applying InputClass "libinput keyboard catchall" [ 19.270] (**) BT5.1 Mouse Keyboard: Applying InputClass "system-keyboard" [ 19.270] (II) Using input driver 'libinput' for 'BT5.1 Mouse Keyboard' [ 19.270] (**) BT5.1 Mouse Keyboard: always reports core events [ 19.270] (**) Option "Device" "/dev/input/event23" [ 19.270] (II) libinput: BT5.1 Mouse Keyboard: is a virtual subdevice [ 19.270] (EE) libinput: BT5.1 Mouse Keyboard: Parent device not available [ 19.272] (II) event23 - BT5.1 Mouse Keyboard: is tagged by udev as: Keyboard [ 19.272] (II) event23 - BT5.1 Mouse Keyboard: device is a keyboard [ 19.272] (II) event23 - BT5.1 Mouse Keyboard: device removed [ 19.287] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:32C2:6621.0008/input/input28/event23" [ 19.287] (II) XINPUT: Adding extended input device "BT5.1 Mouse Keyboard" (type: KEYBOARD, id 24) [ 19.287] (**) Option "xkb_layout" "fr" [ 19.287] (**) Option "xkb_variant" "azerty" [ 280.867] (II) config/udev: removing device Power Button [ 280.867] (II) UnloadModule: "libinput" [ 280.869] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 280.869] (**) Power Button: Applying InputClass "devname" [ 280.869] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 280.869] (**) Power Button: Applying InputClass "system-keyboard" [ 280.869] (II) Using input driver 'libinput' for 'Power Button' [ 280.869] (**) Power Button: always reports core events [ 280.869] (**) Option "Device" "/dev/input/event2" [ 280.873] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 280.873] (II) event2 - Power Button: device is a keyboard [ 280.873] (II) event2 - Power Button: device removed [ 280.880] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 280.880] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 280.880] (**) Option "xkb_layout" "fr" [ 280.880] (**) Option "xkb_variant" "azerty" [ 280.906] (II) config/udev: removing device Video Bus [ 280.906] (II) UnloadModule: "libinput" [ 280.907] (II) config/udev: Adding input device Video Bus (/dev/input/event16) [ 280.907] (**) Video Bus: Applying InputClass "devname" [ 280.907] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 280.907] (**) Video Bus: Applying InputClass "system-keyboard" [ 280.907] (II) Using input driver 'libinput' for 'Video Bus' [ 280.907] (**) Video Bus: always reports core events [ 280.907] (**) Option "Device" "/dev/input/event16" [ 280.910] (II) event16 - Video Bus: is tagged by udev as: Keyboard [ 280.910] (II) event16 - Video Bus: device is a keyboard [ 280.910] (II) event16 - Video Bus: device removed [ 280.920] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21/event16" [ 280.920] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 280.920] (**) Option "xkb_layout" "fr" [ 280.920] (**) Option "xkb_variant" "azerty" [ 280.946] (II) config/udev: removing device Lid Switch [ 280.946] (II) UnloadModule: "libinput" [ 280.947] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 280.947] (**) Lid Switch: Applying InputClass "devname" [ 280.947] (II) Using input driver 'libinput' for 'Lid Switch' [ 280.947] (**) Lid Switch: always reports core events [ 280.947] (**) Option "Device" "/dev/input/event0" [ 281.009] (II) event0 - Lid Switch: is tagged by udev as: Switch [ 281.061] (II) event0 - Lid Switch: device is a switch device [ 281.137] (II) event0 - Lid Switch: device removed [ 281.144] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/PNP0C0D:00/input/input0/event0" [ 281.144] (II) XINPUT: Adding extended input device "Lid Switch" (type: KEYBOARD, id 8) [ 281.144] (II) config/udev: removing device Power Button [ 281.144] (II) UnloadModule: "libinput" [ 281.145] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 281.145] (**) Power Button: Applying InputClass "devname" [ 281.145] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 281.145] (**) Power Button: Applying InputClass "system-keyboard" [ 281.145] (II) Using input driver 'libinput' for 'Power Button' [ 281.146] (**) Power Button: always reports core events [ 281.146] (**) Option "Device" "/dev/input/event1" [ 281.148] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 281.148] (II) event1 - Power Button: device is a keyboard [ 281.148] (II) event1 - Power Button: device removed [ 281.154] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 281.154] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9) [ 281.154] (**) Option "xkb_layout" "fr" [ 281.154] (**) Option "xkb_variant" "azerty" [ 281.156] (II) config/udev: removing device Compx 2.4G Receiver [ 281.156] (II) UnloadModule: "libinput" [ 281.160] (II) config/udev: Adding input device Compx 2.4G Receiver (/dev/input/event4) [ 281.160] (**) Compx 2.4G Receiver: Applying InputClass "devname" [ 281.160] (**) Compx 2.4G Receiver: Applying InputClass "libinput keyboard catchall" [ 281.160] (**) Compx 2.4G Receiver: Applying InputClass "system-keyboard" [ 281.160] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver' [ 281.160] (**) Compx 2.4G Receiver: always reports core events [ 281.160] (**) Option "Device" "/dev/input/event4" [ 281.184] (II) event4 - Compx 2.4G Receiver: is tagged by udev as: Keyboard [ 281.192] (II) event4 - Compx 2.4G Receiver: device is a keyboard [ 281.202] (II) event4 - Compx 2.4G Receiver: device removed [ 281.210] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:25A7:FA61.0001/input/input4/event4" [ 281.210] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver" (type: KEYBOARD, id 10) [ 281.210] (**) Option "xkb_layout" "fr" [ 281.210] (**) Option "xkb_variant" "azerty" [ 281.212] (II) config/udev: removing device Compx 2.4G Receiver System Control [ 281.212] (II) UnloadModule: "libinput" [ 281.216] (II) config/udev: Adding input device Compx 2.4G Receiver System Control (/dev/input/event8) [ 281.216] (**) Compx 2.4G Receiver System Control: Applying InputClass "devname" [ 281.216] (**) Compx 2.4G Receiver System Control: Applying InputClass "libinput keyboard catchall" [ 281.216] (**) Compx 2.4G Receiver System Control: Applying InputClass "system-keyboard" [ 281.216] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver System Control' [ 281.216] (**) Compx 2.4G Receiver System Control: always reports core events [ 281.216] (**) Option "Device" "/dev/input/event8" [ 281.234] (II) event8 - Compx 2.4G Receiver System Control: is tagged by udev as: Keyboard [ 281.239] (II) event8 - Compx 2.4G Receiver System Control: device is a keyboard [ 281.239] (II) event8 - Compx 2.4G Receiver System Control: device removed [ 281.249] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:25A7:FA61.0002/input/input8/event8" [ 281.249] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver System Control" (type: KEYBOARD, id 13) [ 281.249] (**) Option "xkb_layout" "fr" [ 281.249] (**) Option "xkb_variant" "azerty" [ 281.250] (II) config/udev: removing device Compx 2.4G Receiver Consumer Control [ 281.250] (II) UnloadModule: "libinput" [ 281.250] (II) config/udev: removing device Compx 2.4G Receiver Consumer Control [ 281.250] (II) UnloadModule: "libinput" [ 281.252] (II) config/udev: Adding input device Compx 2.4G Receiver Consumer Control (/dev/input/event7) [ 281.252] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "devname" [ 281.252] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 281.252] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "system-keyboard" [ 281.252] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Consumer Control' [ 281.252] (**) Compx 2.4G Receiver Consumer Control: always reports core events [ 281.252] (**) Option "Device" "/dev/input/event7" [ 281.254] (II) event7 - Compx 2.4G Receiver Consumer Control: is tagged by udev as: Keyboard [ 281.254] (II) event7 - Compx 2.4G Receiver Consumer Control: device is a keyboard [ 281.255] (II) event7 - Compx 2.4G Receiver Consumer Control: device removed [ 281.262] (II) libinput: Compx 2.4G Receiver Consumer Control: needs a virtual subdevice [ 281.262] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:25A7:FA61.0002/input/input7/event7" [ 281.262] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver Consumer Control" (type: MOUSE, id 12) [ 281.262] (**) Option "AccelerationScheme" "none" [ 281.262] (**) Compx 2.4G Receiver Consumer Control: (accel) selected scheme none/0 [ 281.262] (**) Compx 2.4G Receiver Consumer Control: (accel) acceleration factor: 2.000 [ 281.262] (**) Compx 2.4G Receiver Consumer Control: (accel) acceleration threshold: 4 [ 281.262] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "devname" [ 281.262] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 281.262] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "system-keyboard" [ 281.262] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Consumer Control' [ 281.262] (**) Compx 2.4G Receiver Consumer Control: always reports core events [ 281.262] (**) Option "Device" "/dev/input/event7" [ 281.262] (II) libinput: Compx 2.4G Receiver Consumer Control: is a virtual subdevice [ 281.262] (EE) libinput: Compx 2.4G Receiver Consumer Control: Parent device not available [ 281.265] (II) event7 - Compx 2.4G Receiver Consumer Control: is tagged by udev as: Keyboard [ 281.266] (II) event7 - Compx 2.4G Receiver Consumer Control: device is a keyboard [ 281.266] (II) event7 - Compx 2.4G Receiver Consumer Control: device removed [ 281.282] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:25A7:FA61.0002/input/input7/event7" [ 281.282] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver Consumer Control" (type: KEYBOARD, id 21) [ 281.282] (**) Option "xkb_layout" "fr" [ 281.282] (**) Option "xkb_variant" "azerty" [ 281.284] (II) config/udev: removing device Intel HID 5 button array [ 281.284] (II) UnloadModule: "libinput" [ 281.284] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event12) [ 281.284] (**) Intel HID 5 button array: Applying InputClass "devname" [ 281.284] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall" [ 281.284] (**) Intel HID 5 button array: Applying InputClass "system-keyboard" [ 281.284] (II) Using input driver 'libinput' for 'Intel HID 5 button array' [ 281.284] (**) Intel HID 5 button array: always reports core events [ 281.284] (**) Option "Device" "/dev/input/event12" [ 281.286] (II) event12 - Intel HID 5 button array: is tagged by udev as: Keyboard [ 281.286] (II) event12 - Intel HID 5 button array: device is a keyboard [ 281.286] (II) event12 - Intel HID 5 button array: device removed [ 281.299] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input17/event12" [ 281.299] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 17) [ 281.299] (**) Option "xkb_layout" "fr" [ 281.299] (**) Option "xkb_variant" "azerty" [ 281.301] (II) config/udev: Adding input device Compx 2.4G Receiver Mouse (/dev/input/mouse0) [ 281.301] (**) Compx 2.4G Receiver Mouse: Applying InputClass "devname" [ 281.301] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Mouse' [ 281.301] (**) Compx 2.4G Receiver Mouse: always reports core events [ 281.301] (**) Option "Device" "/dev/input/mouse0" [ 281.332] (II) mouse0 - not using input device '/dev/input/mouse0'. [ 281.332] (EE) libinput: Compx 2.4G Receiver Mouse: Failed to create a device for /dev/input/mouse0 [ 281.332] (EE) PreInit returned 2 for "Compx 2.4G Receiver Mouse" [ 281.332] (II) UnloadModule: "libinput" [ 281.332] (II) config/udev: removing device Intel HID switches [ 281.332] (II) UnloadModule: "libinput" [ 281.332] (II) config/udev: Adding input device Intel HID switches (/dev/input/event14) [ 281.332] (**) Intel HID switches: Applying InputClass "devname" [ 281.332] (II) Using input driver 'libinput' for 'Intel HID switches' [ 281.333] (**) Intel HID switches: always reports core events [ 281.333] (**) Option "Device" "/dev/input/event14" [ 281.333] (II) event14 - Intel HID switches: is tagged by udev as: Switch [ 281.334] (II) event14 - Intel HID switches: device is a switch device [ 281.334] (II) event14 - Intel HID switches: device removed [ 281.342] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input20/event14" [ 281.342] (II) XINPUT: Adding extended input device "Intel HID switches" (type: KEYBOARD, id 18) [ 281.343] (II) config/udev: Adding input device sof-hda-dsp Mic (/dev/input/event17) [ 281.343] (**) sof-hda-dsp Mic: Applying InputClass "devname" [ 281.343] (II) Using input driver 'libinput' for 'sof-hda-dsp Mic' [ 281.343] (**) sof-hda-dsp Mic: always reports core events [ 281.343] (**) Option "Device" "/dev/input/event17" [ 281.344] (II) event17 - sof-hda-dsp Mic: is tagged by udev as: Switch [ 281.360] (II) event17 - not using input device '/dev/input/event17'. [ 281.360] (EE) libinput: sof-hda-dsp Mic: Failed to create a device for /dev/input/event17 [ 281.360] (EE) PreInit returned 2 for "sof-hda-dsp Mic" [ 281.360] (II) UnloadModule: "libinput" [ 281.360] (II) config/udev: removing device Intel HID events [ 281.360] (II) UnloadModule: "libinput" [ 281.360] (II) config/udev: Adding input device Intel HID events (/dev/input/event11) [ 281.360] (**) Intel HID events: Applying InputClass "devname" [ 281.360] (**) Intel HID events: Applying InputClass "libinput keyboard catchall" [ 281.360] (**) Intel HID events: Applying InputClass "system-keyboard" [ 281.360] (II) Using input driver 'libinput' for 'Intel HID events' [ 281.360] (**) Intel HID events: always reports core events [ 281.360] (**) Option "Device" "/dev/input/event11" [ 281.361] (II) event11 - Intel HID events: is tagged by udev as: Keyboard [ 281.361] (II) event11 - Intel HID events: device is a keyboard [ 281.361] (II) event11 - Intel HID events: device removed [ 281.369] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input16/event11" [ 281.369] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 16) [ 281.369] (**) Option "xkb_layout" "fr" [ 281.369] (**) Option "xkb_variant" "azerty" [ 281.369] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=5 (/dev/input/event21) [ 281.369] (**) sof-hda-dsp HDMI/DP,pcm=5: Applying InputClass "devname" [ 281.369] (II) Using input driver 'libinput' for 'sof-hda-dsp HDMI/DP,pcm=5' [ 281.369] (**) sof-hda-dsp HDMI/DP,pcm=5: always reports core events [ 281.369] (**) Option "Device" "/dev/input/event21" [ 281.370] (II) event21 - sof-hda-dsp HDMI/DP,pcm=5: is tagged by udev as: Switch [ 281.386] (II) event21 - not using input device '/dev/input/event21'. [ 281.386] (EE) libinput: sof-hda-dsp HDMI/DP,pcm=5: Failed to create a device for /dev/input/event21 [ 281.386] (EE) PreInit returned 2 for "sof-hda-dsp HDMI/DP,pcm=5" [ 281.386] (II) UnloadModule: "libinput" [ 281.386] (II) config/udev: Adding input device PC Speaker (/dev/input/event13) [ 281.386] (**) PC Speaker: Applying InputClass "devname" [ 281.386] (II) Using input driver 'libinput' for 'PC Speaker' [ 281.386] (**) PC Speaker: always reports core events [ 281.386] (**) Option "Device" "/dev/input/event13" [ 281.387] (II) event13 - PC Speaker: not tagged as supported input device [ 281.407] (II) event13 - not using input device '/dev/input/event13'. [ 281.407] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event13 [ 281.407] (EE) PreInit returned 2 for "PC Speaker" [ 281.407] (II) UnloadModule: "libinput" [ 281.407] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=4 (/dev/input/event20) [ 281.407] (**) sof-hda-dsp HDMI/DP,pcm=4: Applying InputClass "devname" [ 281.407] (II) Using input driver 'libinput' for 'sof-hda-dsp HDMI/DP,pcm=4' [ 281.407] (**) sof-hda-dsp HDMI/DP,pcm=4: always reports core events [ 281.407] (**) Option "Device" "/dev/input/event20" [ 281.408] (II) event20 - sof-hda-dsp HDMI/DP,pcm=4: is tagged by udev as: Switch [ 281.420] (II) event20 - not using input device '/dev/input/event20'. [ 281.420] (EE) libinput: sof-hda-dsp HDMI/DP,pcm=4: Failed to create a device for /dev/input/event20 [ 281.420] (EE) PreInit returned 2 for "sof-hda-dsp HDMI/DP,pcm=4" [ 281.420] (II) UnloadModule: "libinput" [ 281.421] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=3 (/dev/input/event19) [ 281.421] (**) sof-hda-dsp HDMI/DP,pcm=3: Applying InputClass "devname" [ 281.421] (II) Using input driver 'libinput' for 'sof-hda-dsp HDMI/DP,pcm=3' [ 281.421] (**) sof-hda-dsp HDMI/DP,pcm=3: always reports core events [ 281.421] (**) Option "Device" "/dev/input/event19" [ 281.423] (II) event19 - sof-hda-dsp HDMI/DP,pcm=3: is tagged by udev as: Switch [ 281.435] (II) event19 - not using input device '/dev/input/event19'. [ 281.435] (EE) libinput: sof-hda-dsp HDMI/DP,pcm=3: Failed to create a device for /dev/input/event19 [ 281.435] (EE) PreInit returned 2 for "sof-hda-dsp HDMI/DP,pcm=3" [ 281.435] (II) UnloadModule: "libinput" [ 281.436] (II) config/udev: removing device Compx 2.4G Receiver Mouse [ 281.436] (II) UnloadModule: "libinput" [ 281.438] (II) config/udev: Adding input device Compx 2.4G Receiver Mouse (/dev/input/event5) [ 281.438] (**) Compx 2.4G Receiver Mouse: Applying InputClass "devname" [ 281.438] (**) Compx 2.4G Receiver Mouse: Applying InputClass "libinput pointer catchall" [ 281.438] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Mouse' [ 281.438] (**) Compx 2.4G Receiver Mouse: always reports core events [ 281.438] (**) Option "Device" "/dev/input/event5" [ 281.440] (II) event5 - Compx 2.4G Receiver Mouse: is tagged by udev as: Mouse [ 281.441] (II) event5 - Compx 2.4G Receiver Mouse: device is a pointer [ 281.441] (II) event5 - Compx 2.4G Receiver Mouse: device removed [ 281.456] (II) libinput: Compx 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 281.456] (II) libinput: Compx 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 281.456] (II) libinput: Compx 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 281.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:25A7:FA61.0002/input/input5/event5" [ 281.456] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver Mouse" (type: MOUSE, id 11) [ 281.456] (**) Option "AccelerationScheme" "none" [ 281.457] (**) Compx 2.4G Receiver Mouse: (accel) selected scheme none/0 [ 281.457] (**) Compx 2.4G Receiver Mouse: (accel) acceleration factor: 2.000 [ 281.457] (**) Compx 2.4G Receiver Mouse: (accel) acceleration threshold: 4 [ 281.459] (II) config/udev: Adding input device SYNA32CF:00 06CB:CECD Mouse (/dev/input/mouse1) [ 281.459] (**) SYNA32CF:00 06CB:CECD Mouse: Applying InputClass "devname" [ 281.459] (II) Using input driver 'libinput' for 'SYNA32CF:00 06CB:CECD Mouse' [ 281.459] (**) SYNA32CF:00 06CB:CECD Mouse: always reports core events [ 281.459] (**) Option "Device" "/dev/input/mouse1" [ 281.472] (II) mouse1 - not using input device '/dev/input/mouse1'. [ 281.472] (EE) libinput: SYNA32CF:00 06CB:CECD Mouse: Failed to create a device for /dev/input/mouse1 [ 281.472] (EE) PreInit returned 2 for "SYNA32CF:00 06CB:CECD Mouse" [ 281.472] (II) UnloadModule: "libinput" [ 281.474] (II) config/udev: Adding input device SYNA32CF:00 06CB:CECD Touchpad (/dev/input/mouse2) [ 281.474] (**) SYNA32CF:00 06CB:CECD Touchpad: Applying InputClass "devname" [ 281.475] (II) Using input driver 'libinput' for 'SYNA32CF:00 06CB:CECD Touchpad' [ 281.475] (**) SYNA32CF:00 06CB:CECD Touchpad: always reports core events [ 281.475] (**) Option "Device" "/dev/input/mouse2" [ 281.491] (II) mouse2 - not using input device '/dev/input/mouse2'. [ 281.491] (EE) libinput: SYNA32CF:00 06CB:CECD Touchpad: Failed to create a device for /dev/input/mouse2 [ 281.491] (EE) PreInit returned 2 for "SYNA32CF:00 06CB:CECD Touchpad" [ 281.491] (II) UnloadModule: "libinput" [ 281.495] (II) config/udev: Adding input device Compx 2.4G Receiver (/dev/input/event6) [ 281.495] (**) Compx 2.4G Receiver: Applying InputClass "devname" [ 281.495] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver' [ 281.495] (**) Compx 2.4G Receiver: always reports core events [ 281.495] (**) Option "Device" "/dev/input/event6" [ 281.497] (II) event6 - Compx 2.4G Receiver: not tagged as supported input device [ 281.514] (II) event6 - not using input device '/dev/input/event6'. [ 281.514] (EE) libinput: Compx 2.4G Receiver: Failed to create a device for /dev/input/event6 [ 281.514] (EE) PreInit returned 2 for "Compx 2.4G Receiver" [ 281.514] (II) UnloadModule: "libinput" [ 281.516] (II) config/udev: Adding input device sof-hda-dsp Headphone (/dev/input/event18) [ 281.516] (**) sof-hda-dsp Headphone: Applying InputClass "devname" [ 281.516] (II) Using input driver 'libinput' for 'sof-hda-dsp Headphone' [ 281.516] (**) sof-hda-dsp Headphone: always reports core events [ 281.516] (**) Option "Device" "/dev/input/event18" [ 281.518] (II) event18 - sof-hda-dsp Headphone: is tagged by udev as: Switch [ 281.542] (II) event18 - not using input device '/dev/input/event18'. [ 281.542] (EE) libinput: sof-hda-dsp Headphone: Failed to create a device for /dev/input/event18 [ 281.542] (EE) PreInit returned 2 for "sof-hda-dsp Headphone" [ 281.542] (II) UnloadModule: "libinput" [ 281.543] (II) config/udev: removing device SYNA32CF:00 06CB:CECD Mouse [ 281.543] (II) UnloadModule: "libinput" [ 281.544] (II) config/udev: Adding input device SYNA32CF:00 06CB:CECD Mouse (/dev/input/event9) [ 281.544] (**) SYNA32CF:00 06CB:CECD Mouse: Applying InputClass "devname" [ 281.544] (**) SYNA32CF:00 06CB:CECD Mouse: Applying InputClass "libinput pointer catchall" [ 281.544] (II) Using input driver 'libinput' for 'SYNA32CF:00 06CB:CECD Mouse' [ 281.544] (**) SYNA32CF:00 06CB:CECD Mouse: always reports core events [ 281.544] (**) Option "Device" "/dev/input/event9" [ 281.547] (II) event9 - SYNA32CF:00 06CB:CECD Mouse: is tagged by udev as: Mouse Pointingstick [ 281.548] (II) event9 - SYNA32CF:00 06CB:CECD Mouse: device is a pointer [ 281.548] (II) event9 - SYNA32CF:00 06CB:CECD Mouse: device removed [ 281.556] (II) libinput: SYNA32CF:00 06CB:CECD Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 281.556] (II) libinput: SYNA32CF:00 06CB:CECD Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 281.556] (II) libinput: SYNA32CF:00 06CB:CECD Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 281.556] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.1/i2c-1/i2c-SYNA32CF:00/0018:06CB:CECD.0003/input/input13/event9" [ 281.556] (II) XINPUT: Adding extended input device "SYNA32CF:00 06CB:CECD Mouse" (type: MOUSE, id 14) [ 281.556] (**) Option "AccelerationScheme" "none" [ 281.556] (**) SYNA32CF:00 06CB:CECD Mouse: (accel) selected scheme none/0 [ 281.556] (**) SYNA32CF:00 06CB:CECD Mouse: (accel) acceleration factor: 2.000 [ 281.556] (**) SYNA32CF:00 06CB:CECD Mouse: (accel) acceleration threshold: 4 [ 281.558] (II) config/udev: removing device AT Translated Set 2 keyboard [ 281.558] (II) UnloadModule: "libinput" [ 281.559] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 281.559] (**) AT Translated Set 2 keyboard: Applying InputClass "devname" [ 281.559] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 281.559] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 281.559] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 281.559] (**) AT Translated Set 2 keyboard: always reports core events [ 281.559] (**) Option "Device" "/dev/input/event3" [ 281.561] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 281.561] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 281.561] (II) event3 - AT Translated Set 2 keyboard: device removed [ 281.569] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 281.569] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 19) [ 281.569] (**) Option "xkb_layout" "fr" [ 281.569] (**) Option "xkb_variant" "azerty" [ 281.571] (II) config/udev: removing device SYNA32CF:00 06CB:CECD Touchpad [ 281.571] (II) UnloadModule: "libinput" [ 281.572] (II) config/udev: Adding input device SYNA32CF:00 06CB:CECD Touchpad (/dev/input/event10) [ 281.572] (**) SYNA32CF:00 06CB:CECD Touchpad: Applying InputClass "devname" [ 281.572] (**) SYNA32CF:00 06CB:CECD Touchpad: Applying InputClass "libinput touchpad catchall" [ 281.572] (II) Using input driver 'libinput' for 'SYNA32CF:00 06CB:CECD Touchpad' [ 281.572] (**) SYNA32CF:00 06CB:CECD Touchpad: always reports core events [ 281.572] (**) Option "Device" "/dev/input/event10" [ 281.574] (II) event10 - SYNA32CF:00 06CB:CECD Touchpad: is tagged by udev as: Touchpad [ 281.577] (II) event10 - SYNA32CF:00 06CB:CECD Touchpad: device is a touchpad [ 281.577] (II) event10 - SYNA32CF:00 06CB:CECD Touchpad: device removed [ 281.595] (**) Option "Tapping" "on" [ 281.595] (II) libinput: SYNA32CF:00 06CB:CECD Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 281.595] (II) libinput: SYNA32CF:00 06CB:CECD Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 281.595] (II) libinput: SYNA32CF:00 06CB:CECD Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 281.596] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.1/i2c-1/i2c-SYNA32CF:00/0018:06CB:CECD.0003/input/input14/event10" [ 281.596] (II) XINPUT: Adding extended input device "SYNA32CF:00 06CB:CECD Touchpad" (type: TOUCHPAD, id 15) [ 281.600] (**) Option "AccelerationScheme" "none" [ 281.600] (**) SYNA32CF:00 06CB:CECD Touchpad: (accel) selected scheme none/0 [ 281.600] (**) SYNA32CF:00 06CB:CECD Touchpad: (accel) acceleration factor: 2.000 [ 281.600] (**) SYNA32CF:00 06CB:CECD Touchpad: (accel) acceleration threshold: 4 [ 281.601] (II) config/udev: removing device HP WMI hotkeys [ 281.601] (II) UnloadModule: "libinput" [ 281.601] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event15) [ 281.601] (**) HP WMI hotkeys: Applying InputClass "devname" [ 281.601] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 281.601] (**) HP WMI hotkeys: Applying InputClass "system-keyboard" [ 281.601] (II) Using input driver 'libinput' for 'HP WMI hotkeys' [ 281.602] (**) HP WMI hotkeys: always reports core events [ 281.602] (**) Option "Device" "/dev/input/event15" [ 281.602] (II) event15 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 281.602] (II) event15 - HP WMI hotkeys: device is a keyboard [ 281.602] (II) event15 - HP WMI hotkeys: device is a switch device [ 281.603] (II) event15 - HP WMI hotkeys: device removed [ 281.619] (**) Option "config_info" "udev:/sys/devices/virtual/input/input19/event15" [ 281.619] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 20) [ 281.619] (**) Option "xkb_layout" "fr" [ 281.619] (**) Option "xkb_variant" "azerty" [ 281.624] (II) config/udev: Adding input device BT5.1 Mouse (/dev/input/mouse3) [ 281.624] (**) BT5.1 Mouse: Applying InputClass "devname" [ 281.624] (II) Using input driver 'libinput' for 'BT5.1 Mouse' [ 281.624] (**) BT5.1 Mouse: always reports core events [ 281.624] (**) Option "Device" "/dev/input/mouse3" [ 281.638] (II) mouse3 - not using input device '/dev/input/mouse3'. [ 281.638] (EE) libinput: BT5.1 Mouse: Failed to create a device for /dev/input/mouse3 [ 281.638] (EE) PreInit returned 2 for "BT5.1 Mouse" [ 281.638] (II) UnloadModule: "libinput" [ 281.638] (II) config/udev: removing device BT5.1 Mouse [ 281.638] (II) UnloadModule: "libinput" [ 281.639] (II) config/udev: Adding input device BT5.1 Mouse (/dev/input/event22) [ 281.639] (**) BT5.1 Mouse: Applying InputClass "devname" [ 281.639] (**) BT5.1 Mouse: Applying InputClass "libinput pointer catchall" [ 281.639] (II) Using input driver 'libinput' for 'BT5.1 Mouse' [ 281.639] (**) BT5.1 Mouse: always reports core events [ 281.639] (**) Option "Device" "/dev/input/event22" [ 281.640] (II) event22 - BT5.1 Mouse: is tagged by udev as: Mouse [ 281.640] (II) event22 - BT5.1 Mouse: device is a pointer [ 281.640] (II) event22 - BT5.1 Mouse: device removed [ 281.650] (II) libinput: BT5.1 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 281.650] (II) libinput: BT5.1 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 281.650] (II) libinput: BT5.1 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 281.650] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:32C2:6621.0008/input/input27/event22" [ 281.650] (II) XINPUT: Adding extended input device "BT5.1 Mouse" (type: MOUSE, id 22) [ 281.650] (**) Option "AccelerationScheme" "none" [ 281.650] (**) BT5.1 Mouse: (accel) selected scheme none/0 [ 281.650] (**) BT5.1 Mouse: (accel) acceleration factor: 2.000 [ 281.650] (**) BT5.1 Mouse: (accel) acceleration threshold: 4 [ 281.650] (II) config/udev: removing device BT5.1 Mouse Keyboard [ 281.650] (II) UnloadModule: "libinput" [ 281.650] (II) config/udev: removing device BT5.1 Mouse Keyboard [ 281.650] (II) UnloadModule: "libinput" [ 281.651] (II) config/udev: Adding input device BT5.1 Mouse Keyboard (/dev/input/event23) [ 281.651] (**) BT5.1 Mouse Keyboard: Applying InputClass "devname" [ 281.651] (**) BT5.1 Mouse Keyboard: Applying InputClass "libinput keyboard catchall" [ 281.651] (**) BT5.1 Mouse Keyboard: Applying InputClass "system-keyboard" [ 281.651] (II) Using input driver 'libinput' for 'BT5.1 Mouse Keyboard' [ 281.651] (**) BT5.1 Mouse Keyboard: always reports core events [ 281.651] (**) Option "Device" "/dev/input/event23" [ 281.652] (II) event23 - BT5.1 Mouse Keyboard: is tagged by udev as: Keyboard [ 281.652] (II) event23 - BT5.1 Mouse Keyboard: device is a keyboard [ 281.652] (II) event23 - BT5.1 Mouse Keyboard: device removed [ 281.660] (II) libinput: BT5.1 Mouse Keyboard: needs a virtual subdevice [ 281.660] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:32C2:6621.0008/input/input28/event23" [ 281.660] (II) XINPUT: Adding extended input device "BT5.1 Mouse Keyboard" (type: MOUSE, id 23) [ 281.660] (**) Option "AccelerationScheme" "none" [ 281.660] (**) BT5.1 Mouse Keyboard: (accel) selected scheme none/0 [ 281.660] (**) BT5.1 Mouse Keyboard: (accel) acceleration factor: 2.000 [ 281.660] (**) BT5.1 Mouse Keyboard: (accel) acceleration threshold: 4 [ 281.660] (**) BT5.1 Mouse Keyboard: Applying InputClass "devname" [ 281.660] (**) BT5.1 Mouse Keyboard: Applying InputClass "libinput keyboard catchall" [ 281.660] (**) BT5.1 Mouse Keyboard: Applying InputClass "system-keyboard" [ 281.660] (II) Using input driver 'libinput' for 'BT5.1 Mouse Keyboard' [ 281.660] (**) BT5.1 Mouse Keyboard: always reports core events [ 281.660] (**) Option "Device" "/dev/input/event23" [ 281.660] (II) libinput: BT5.1 Mouse Keyboard: is a virtual subdevice [ 281.660] (EE) libinput: BT5.1 Mouse Keyboard: Parent device not available [ 281.661] (II) event23 - BT5.1 Mouse Keyboard: is tagged by udev as: Keyboard [ 281.661] (II) event23 - BT5.1 Mouse Keyboard: device is a keyboard [ 281.661] (II) event23 - BT5.1 Mouse Keyboard: device removed [ 281.669] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:32C2:6621.0008/input/input28/event23" [ 281.669] (II) XINPUT: Adding extended input device "BT5.1 Mouse Keyboard" (type: KEYBOARD, id 24) [ 281.669] (**) Option "xkb_layout" "fr" [ 281.669] (**) Option "xkb_variant" "azerty"